This is the latest recevied telemetry packets stored in our database for station/object KC3ARY. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Battery Voltage* | Battery Current* | Load Current* | Solar Voltage* | Solar Current* |
---|---|---|---|---|---|
1715333431 | 12.28 V | 379 mA | -353 mA | 0 V | 0 mA |
1715332831 | 12.28 V | 388 mA | -359 mA | 0 V | 0 mA |
1715332231 | 12.31 V | 322 mA | -296 mA | 0 V | 0 mA |
1715331631 | 12.3 V | 343 mA | -318 mA | 0 V | 0 mA |
1715331031 | 12.31 V | 344 mA | -319 mA | 0 V | 0 mA |
1715330429 | 12.31 V | 344 mA | -319 mA | 0 V | 0 mA |
1715329831 | 12.3 V | 379 mA | -354 mA | 0 V | 0 mA |
1715329231 | 12.3 V | 412 mA | -390 mA | 0 V | 0 mA |
1715328630 | 12.31 V | 367 mA | -342 mA | 0 V | 0 mA |
1715328030 | 12.32 V | 357 mA | -331 mA | 0 V | 0 mA |
1715327430 | 12.32 V | 358 mA | -335 mA | 0 V | 0 mA |
1715326828 | 12.33 V | 344 mA | -319 mA | 0 V | 0 mA |
1715326230 | 12.33 V | 362 mA | -337 mA | 0 V | 0 mA |
1715325630 | 12.33 V | 369 mA | -345 mA | 0 V | 0 mA |
1715325031 | 12.34 V | 349 mA | -325 mA | 0 V | 0 mA |
1715324431 | 12.35 V | 346 mA | -324 mA | 0 V | 0 mA |
1715323831 | 12.34 V | 391 mA | -368 mA | 0 V | 0 mA |
1715323229 | 12.34 V | 383 mA | -361 mA | 0 V | 0 mA |
1715322631 | 12.35 V | 362 mA | -340 mA | 0 V | 0 mA |
1715322031 | 12.35 V | 362 mA | -340 mA | 0 V | 0 mA |
1715321431 | 12.36 V | 352 mA | -330 mA | 0 V | 0 mA |
1715320831 | 12.36 V | 358 mA | -335 mA | 0 V | 0 mA |
1715320236 | 12.36 V | 393 mA | -372 mA | 0 V | 0 mA |
1715319634 | 12.36 V | 394 mA | -372 mA | 0 V | 0 mA |
1715319031 | 12.37 V | 349 mA | -328 mA | 0 V | 0 mA |
*Used Equation Coefficients:
Battery Voltage: 0, 0.01, 0
Battery Current: 0, 1, -4096
Load Current: 0, 1, -4096
Solar Voltage: 0, 0.01, 0
Solar Current: 0, 1, -4096
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)