This is the latest recevied telemetry packets stored in our database for station/object KC3ARY. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Battery Voltage* | Battery Current* | Load Current* | Solar Voltage* | Solar Current* |
---|---|---|---|---|---|
1716193230 | 12.32 V | 374 mA | -349 mA | 0 V | 0 mA |
1716192630 | 12.34 V | 328 mA | -302 mA | 0 V | 0 mA |
1716192030 | 12.34 V | 344 mA | -315 mA | 0 V | 0 mA |
1716191430 | 12.34 V | 365 mA | -340 mA | 0 V | 0 mA |
1716190828 | 12.35 V | 354 mA | -328 mA | 0 V | 0 mA |
1716190231 | 12.36 V | 329 mA | -299 mA | 0 V | 0 mA |
1716189631 | 12.36 V | 361 mA | -337 mA | 0 V | 0 mA |
1716189031 | 12.37 V | 343 mA | -318 mA | 0 V | 0 mA |
1716188431 | 12.37 V | 358 mA | -333 mA | 0 V | 0 mA |
1716187831 | 12.37 V | 375 mA | -351 mA | 0 V | 0 mA |
1716187229 | 12.38 V | 357 mA | -334 mA | 0 V | 0 mA |
1716186631 | 12.4 V | 331 mA | -306 mA | 0 V | 0 mA |
1716186030 | 12.4 V | 341 mA | -317 mA | 0 V | 0 mA |
1716185430 | 12.41 V | 319 mA | -295 mA | 0 V | 0 mA |
1716184830 | 12.41 V | 328 mA | -300 mA | 0 V | 0 mA |
1716184230 | 12.42 V | 340 mA | -314 mA | 0 V | 0 mA |
1716183628 | 12.42 V | 354 mA | -327 mA | 0 V | 0 mA |
1716183030 | 12.43 V | 334 mA | -311 mA | 0 V | 0 mA |
1716182430 | 12.42 V | 376 mA | -355 mA | 0 V | 0 mA |
1716181830 | 12.44 V | 336 mA | -314 mA | 0 V | 0 mA |
1716181230 | 12.45 V | 329 mA | -304 mA | 0 V | 0 mA |
1716180630 | 12.45 V | 332 mA | -308 mA | 0 V | 0 mA |
1716180028 | 12.45 V | 347 mA | -323 mA | 0 V | 0 mA |
1716179430 | 12.46 V | 360 mA | -337 mA | 0 V | 0 mA |
1716178830 | 12.46 V | 355 mA | -331 mA | 0 V | 0 mA |
*Used Equation Coefficients:
Battery Voltage: 0, 0.01, 0
Battery Current: 0, 1, -4096
Load Current: 0, 1, -4096
Solar Voltage: 0, 0.01, 0
Solar Current: 0, 1, -4096
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)