This is the latest recevied telemetry packets stored in our database for station/object SP8G. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1792537717 | 0 Count | 757 Count | 503 Count | 0.28 VDC | 0.08 VDC |
| 1792537116 | 0 Count | 754 Count | 501 Count | 0.28 VDC | 0.08 VDC |
| 1792536516 | 0 Count | 746 Count | 493 Count | 0.28 VDC | 0.08 VDC |
| 1792535915 | 0 Count | 743 Count | 491 Count | 0.28 VDC | 0.08 VDC |
| 1792535314 | 0 Count | 740 Count | 489 Count | 0.28 VDC | 0.08 VDC |
| 1792534713 | 0 Count | 738 Count | 487 Count | 0.28 VDC | 0.08 VDC |
| 1792534112 | 0 Count | 735 Count | 485 Count | 0.28 VDC | 0.08 VDC |
| 1792533511 | 0 Count | 732 Count | 483 Count | 0.28 VDC | 0.08 VDC |
| 1792532911 | 0 Count | 730 Count | 481 Count | 0.28 VDC | 0.08 VDC |
| 1792532310 | 0 Count | 727 Count | 479 Count | 0.28 VDC | 0.08 VDC |
| 1792531709 | 0 Count | 724 Count | 477 Count | 0.28 VDC | 0.08 VDC |
| 1792531108 | 0 Count | 722 Count | 475 Count | 0.28 VDC | 0.08 VDC |
| 1792530508 | 0 Count | 719 Count | 473 Count | 0.28 VDC | 0.08 VDC |
| 1792529907 | 0 Count | 716 Count | 471 Count | 0.28 VDC | 0.08 VDC |
| 1792529306 | 0 Count | 714 Count | 469 Count | 0.28 VDC | 0.08 VDC |
| 1792528705 | 0 Count | 711 Count | 467 Count | 0.28 VDC | 0.08 VDC |
| 1792528105 | 0 Count | 708 Count | 465 Count | 0.28 VDC | 0.08 VDC |
| 1792527504 | 0 Count | 706 Count | 463 Count | 0.28 VDC | 0.08 VDC |
| 1792526903 | 0 Count | 703 Count | 461 Count | 0.28 VDC | 0.08 VDC |
| 1792526302 | 0 Count | 701 Count | 459 Count | 0.28 VDC | 0.08 VDC |
| 1792525702 | 0 Count | 699 Count | 457 Count | 0.28 VDC | 0.08 VDC |
| 1792525101 | 0 Count | 695 Count | 455 Count | 0.28 VDC | 0.08 VDC |
| 1792524500 | 0 Count | 692 Count | 453 Count | 0.28 VDC | 0.08 VDC |
| 1792523899 | 0 Count | 690 Count | 451 Count | 0.28 VDC | 0.08 VDC |
| 1792523299 | 0 Count | 687 Count | 449 Count | 0.28 VDC | 0.08 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)