This is the latest recevied telemetry packets stored in our database for station/object SP8G. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1791088082 | 0 Count | 476 Count | 342 Count | 0.28 VDC | 0.08 VDC |
| 1791087481 | 0 Count | 471 Count | 340 Count | 0.28 VDC | 0.08 VDC |
| 1791086880 | 0 Count | 465 Count | 337 Count | 0.28 VDC | 0.08 VDC |
| 1791086279 | 0 Count | 460 Count | 334 Count | 0.28 VDC | 0.08 VDC |
| 1791085679 | 0 Count | 457 Count | 332 Count | 0.28 VDC | 0.08 VDC |
| 1791085078 | 0 Count | 451 Count | 329 Count | 0.28 VDC | 0.08 VDC |
| 1791084477 | 0 Count | 447 Count | 326 Count | 0.28 VDC | 0.08 VDC |
| 1791083876 | 0 Count | 443 Count | 324 Count | 0.28 VDC | 0.08 VDC |
| 1791083276 | 0 Count | 432 Count | 315 Count | 0.28 VDC | 0.08 VDC |
| 1791082675 | 0 Count | 427 Count | 311 Count | 0.28 VDC | 0.08 VDC |
| 1791082074 | 0 Count | 420 Count | 307 Count | 0.28 VDC | 0.08 VDC |
| 1791081473 | 0 Count | 413 Count | 302 Count | 0.28 VDC | 0.08 VDC |
| 1791080873 | 0 Count | 406 Count | 296 Count | 0.28 VDC | 0.08 VDC |
| 1791080272 | 0 Count | 403 Count | 294 Count | 0.28 VDC | 0.08 VDC |
| 1791079671 | 0 Count | 396 Count | 290 Count | 0.28 VDC | 0.08 VDC |
| 1791079070 | 0 Count | 392 Count | 287 Count | 0.28 VDC | 0.08 VDC |
| 1791078470 | 0 Count | 389 Count | 285 Count | 0.28 VDC | 0.08 VDC |
| 1791077869 | 0 Count | 383 Count | 281 Count | 0.28 VDC | 0.08 VDC |
| 1791077268 | 0 Count | 378 Count | 277 Count | 0.28 VDC | 0.08 VDC |
| 1791076667 | 0 Count | 373 Count | 274 Count | 0.28 VDC | 0.08 VDC |
| 1791076067 | 0 Count | 366 Count | 269 Count | 0.28 VDC | 0.08 VDC |
| 1791075466 | 0 Count | 357 Count | 260 Count | 0.28 VDC | 0.08 VDC |
| 1791074865 | 0 Count | 354 Count | 258 Count | 0.28 VDC | 0.08 VDC |
| 1791074264 | 0 Count | 349 Count | 255 Count | 0.28 VDC | 0.08 VDC |
| 1791073664 | 0 Count | 343 Count | 252 Count | 0.28 VDC | 0.08 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)