This is the latest recevied telemetry packets stored in our database for station/object SP2HCC-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1789822477 | 452 Count | 788 Count | 421 Count | 0 VDC | 0 VDC |
| 1789820976 | 438 Count | 775 Count | 408 Count | 0 VDC | 0 VDC |
| 1789819475 | 423 Count | 761 Count | 394 Count | 0 VDC | 0 VDC |
| 1789817974 | 409 Count | 748 Count | 381 Count | 0 VDC | 0 VDC |
| 1789816473 | 395 Count | 735 Count | 368 Count | 0 VDC | 0 VDC |
| 1789814972 | 380 Count | 721 Count | 354 Count | 0 VDC | 0 VDC |
| 1789813471 | 365 Count | 707 Count | 340 Count | 0 VDC | 0 VDC |
| 1789811970 | 352 Count | 695 Count | 328 Count | 0 VDC | 0 VDC |
| 1789810469 | 340 Count | 684 Count | 317 Count | 0 VDC | 0 VDC |
| 1789810391 | 339 Count | 684 Count | 317 Count | 0 VDC | 0 VDC |
| 1789807956 | 338 Count | 684 Count | 317 Count | 0 VDC | 0 VDC |
| 1789806481 | 337 Count | 684 Count | 317 Count | 0 VDC | 0 VDC |
| 1789804980 | 234 Count | 578 Count | 215 Count | 0 VDC | 0 VDC |
| 1789742650 | 226 Count | 560 Count | 208 Count | 0 VDC | 0 VDC |
| 1789741149 | 201 Count | 507 Count | 184 Count | 0 VDC | 0 VDC |
| 1789739649 | 189 Count | 479 Count | 173 Count | 0 VDC | 0 VDC |
| 1789738148 | 170 Count | 436 Count | 155 Count | 0 VDC | 0 VDC |
| 1789736647 | 158 Count | 410 Count | 144 Count | 0 VDC | 0 VDC |
| 1789735146 | 148 Count | 387 Count | 135 Count | 0 VDC | 0 VDC |
| 1789733646 | 131 Count | 347 Count | 119 Count | 0 VDC | 0 VDC |
| 1789732144 | 121 Count | 321 Count | 110 Count | 0 VDC | 0 VDC |
| 1789730643 | 110 Count | 291 Count | 100 Count | 0 VDC | 0 VDC |
| 1789729142 | 102 Count | 259 Count | 93 Count | 0 VDC | 0 VDC |
| 1789727639 | 87 Count | 217 Count | 79 Count | 0 VDC | 0 VDC |
| 1789726138 | 78 Count | 195 Count | 71 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)