This is the latest recevied telemetry packets stored in our database for station/object SP6BRT-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1793335408 | 0 Count | 713 Count | 0 Count | 0 VDC | 0 VDC |
| 1793333608 | 0 Count | 614 Count | 0 Count | 0 VDC | 0 VDC |
| 1793331808 | 0 Count | 525 Count | 0 Count | 0 VDC | 0 VDC |
| 1793330009 | 0 Count | 442 Count | 0 Count | 0 VDC | 0 VDC |
| 1793328209 | 0 Count | 357 Count | 0 Count | 0 VDC | 0 VDC |
| 1793326409 | 0 Count | 268 Count | 0 Count | 0 VDC | 0 VDC |
| 1793324609 | 0 Count | 180 Count | 0 Count | 0 VDC | 0 VDC |
| 1793322809 | 0 Count | 91 Count | 0 Count | 0 VDC | 0 VDC |
| 1793321009 | 0 Count | 1037 Count | 0 Count | 0 VDC | 0 VDC |
| 1793319209 | 0 Count | 951 Count | 0 Count | 0 VDC | 0 VDC |
| 1793317409 | 0 Count | 855 Count | 0 Count | 0 VDC | 0 VDC |
| 1793315609 | 0 Count | 766 Count | 0 Count | 0 VDC | 0 VDC |
| 1793313809 | 0 Count | 680 Count | 0 Count | 0 VDC | 0 VDC |
| 1793312009 | 0 Count | 596 Count | 0 Count | 0 VDC | 0 VDC |
| 1793310209 | 0 Count | 501 Count | 0 Count | 0 VDC | 0 VDC |
| 1793308408 | 0 Count | 394 Count | 0 Count | 0 VDC | 0 VDC |
| 1793306608 | 0 Count | 302 Count | 0 Count | 0 VDC | 0 VDC |
| 1793304808 | 0 Count | 196 Count | 0 Count | 0 VDC | 0 VDC |
| 1793303008 | 0 Count | 114 Count | 0 Count | 0 VDC | 0 VDC |
| 1793301208 | 0 Count | 1067 Count | 0 Count | 0 VDC | 0 VDC |
| 1793299408 | 0 Count | 972 Count | 0 Count | 0 VDC | 0 VDC |
| 1793297607 | 0 Count | 869 Count | 0 Count | 0 VDC | 0 VDC |
| 1793294007 | 0 Count | 674 Count | 0 Count | 0 VDC | 0 VDC |
| 1793292207 | 0 Count | 572 Count | 0 Count | 0 VDC | 0 VDC |
| 1793290407 | 0 Count | 454 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)