This is the latest recevied telemetry packets stored in our database for station/object PINAL. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | RX_rate* | RelRate* | DrpRate* |
|---|---|---|---|---|---|
| 1791006458 | 4.28 VDC | 13.12 VDC | 708 pkt/h | 102 pkt/h | 606 pkt/h |
| 1791005858 | 4.28 VDC | 13.12 VDC | 588 pkt/h | 96 pkt/h | 492 pkt/h |
| 1791005258 | 4.27 VDC | 13.12 VDC | 1074 pkt/h | 180 pkt/h | 894 pkt/h |
| 1791004658 | 4.28 VDC | 13.12 VDC | 600 pkt/h | 102 pkt/h | 498 pkt/h |
| 1791004058 | 4.28 VDC | 13.14 VDC | 504 pkt/h | 78 pkt/h | 426 pkt/h |
| 1791003457 | 4.28 VDC | 13.12 VDC | 648 pkt/h | 126 pkt/h | 522 pkt/h |
| 1791002857 | 4.28 VDC | 13.12 VDC | 774 pkt/h | 132 pkt/h | 642 pkt/h |
| 1791002257 | 4.28 VDC | 13.12 VDC | 672 pkt/h | 96 pkt/h | 576 pkt/h |
| 1791001657 | 4.27 VDC | 13.12 VDC | 516 pkt/h | 96 pkt/h | 420 pkt/h |
| 1791001057 | 4.28 VDC | 13.14 VDC | 528 pkt/h | 102 pkt/h | 426 pkt/h |
| 1791000456 | 4.28 VDC | 13.14 VDC | 492 pkt/h | 66 pkt/h | 426 pkt/h |
| 1790999856 | 4.28 VDC | 13.14 VDC | 624 pkt/h | 126 pkt/h | 498 pkt/h |
| 1790999257 | 4.28 VDC | 13.12 VDC | 480 pkt/h | 84 pkt/h | 396 pkt/h |
| 1790998656 | 4.28 VDC | 13.14 VDC | 468 pkt/h | 84 pkt/h | 384 pkt/h |
| 1790998055 | 4.28 VDC | 13.14 VDC | 570 pkt/h | 84 pkt/h | 486 pkt/h |
| 1790997455 | 4.28 VDC | 13.14 VDC | 702 pkt/h | 132 pkt/h | 570 pkt/h |
| 1790996855 | 4.28 VDC | 13.14 VDC | 492 pkt/h | 102 pkt/h | 390 pkt/h |
| 1790996255 | 4.28 VDC | 13.14 VDC | 648 pkt/h | 114 pkt/h | 534 pkt/h |
| 1790995658 | 4.28 VDC | 13.14 VDC | 414 pkt/h | 72 pkt/h | 342 pkt/h |
| 1790995054 | 4.28 VDC | 13.14 VDC | 636 pkt/h | 120 pkt/h | 516 pkt/h |
| 1790994454 | 4.28 VDC | 13.14 VDC | 504 pkt/h | 84 pkt/h | 420 pkt/h |
| 1790993854 | 4.28 VDC | 13.14 VDC | 576 pkt/h | 102 pkt/h | 474 pkt/h |
| 1790993254 | 4.27 VDC | 13.16 VDC | 480 pkt/h | 78 pkt/h | 402 pkt/h |
| 1790992653 | 4.28 VDC | 13.16 VDC | 522 pkt/h | 78 pkt/h | 444 pkt/h |
| 1790992053 | 4.28 VDC | 13.18 VDC | 630 pkt/h | 108 pkt/h | 522 pkt/h |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
RX_rate: 0, 1, 0
RelRate: 0, 1, 0
DrpRate: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)