This is the latest recevied telemetry packets stored in our database for station/object PINAL. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | RX_rate* | RelRate* | DrpRate* |
|---|---|---|---|---|---|
| 1793319843 | 4.27 VDC | 13.44 VDC | 438 pkt/h | 192 pkt/h | 246 pkt/h |
| 1793319246 | 4.27 VDC | 13.5 VDC | 253 pkt/h | 94 pkt/h | 159 pkt/h |
| 1793318632 | 4.27 VDC | 13.48 VDC | 150 pkt/h | 36 pkt/h | 114 pkt/h |
| 1793318032 | 4.27 VDC | 13.44 VDC | 240 pkt/h | 66 pkt/h | 174 pkt/h |
| 1793317432 | 4.27 VDC | 13.44 VDC | 180 pkt/h | 66 pkt/h | 114 pkt/h |
| 1793316832 | 4.27 VDC | 13.5 VDC | 162 pkt/h | 60 pkt/h | 102 pkt/h |
| 1793316231 | 4.27 VDC | 13.52 VDC | 222 pkt/h | 72 pkt/h | 150 pkt/h |
| 1793315630 | 4.27 VDC | 13.54 VDC | 198 pkt/h | 66 pkt/h | 132 pkt/h |
| 1793315030 | 4.27 VDC | 13.52 VDC | 210 pkt/h | 66 pkt/h | 144 pkt/h |
| 1793314431 | 4.27 VDC | 13.52 VDC | 204 pkt/h | 66 pkt/h | 138 pkt/h |
| 1793313831 | 4.27 VDC | 13.52 VDC | 186 pkt/h | 66 pkt/h | 120 pkt/h |
| 1793313230 | 4.27 VDC | 13.52 VDC | 186 pkt/h | 66 pkt/h | 120 pkt/h |
| 1793312629 | 4.27 VDC | 13.48 VDC | 186 pkt/h | 66 pkt/h | 120 pkt/h |
| 1793312029 | 4.27 VDC | 13.46 VDC | 168 pkt/h | 66 pkt/h | 102 pkt/h |
| 1793311428 | 4.27 VDC | 13.44 VDC | 252 pkt/h | 54 pkt/h | 198 pkt/h |
| 1793310828 | 4.27 VDC | 13.48 VDC | 329 pkt/h | 120 pkt/h | 210 pkt/h |
| 1793310228 | 4.27 VDC | 13.52 VDC | 359 pkt/h | 138 pkt/h | 222 pkt/h |
| 1793309628 | 4.27 VDC | 13.44 VDC | 186 pkt/h | 60 pkt/h | 126 pkt/h |
| 1793309027 | 4.27 VDC | 13.48 VDC | 306 pkt/h | 108 pkt/h | 198 pkt/h |
| 1793308427 | 4.27 VDC | 13.5 VDC | 270 pkt/h | 126 pkt/h | 144 pkt/h |
| 1793307826 | 4.27 VDC | 13.54 VDC | 228 pkt/h | 96 pkt/h | 132 pkt/h |
| 1793307226 | 4.26 VDC | 13.54 VDC | 198 pkt/h | 60 pkt/h | 138 pkt/h |
| 1793306627 | 4.27 VDC | 13.52 VDC | 210 pkt/h | 66 pkt/h | 144 pkt/h |
| 1793306027 | 4.26 VDC | 13.52 VDC | 186 pkt/h | 60 pkt/h | 126 pkt/h |
| 1793305426 | 4.26 VDC | 13.54 VDC | 228 pkt/h | 78 pkt/h | 150 pkt/h |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
RX_rate: 0, 1, 0
RelRate: 0, 1, 0
DrpRate: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)