This is the latest recevied telemetry packets stored in our database for station/object W5SMB-9. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1789227445 | 473 Volts | 627 Deg.F | 0 | 0 | 0 |
| 1789227408 | 477 Volts | 627 Deg.F | 0 | 0 | 0 |
| 1789227390 | 471 Volts | 627 Deg.F | 0 | 0 | 0 |
| 1789227385 | 473 Volts | 627 Deg.F | 0 | 0 | 0 |
| 1789227353 | 471 Volts | 626 Deg.F | 0 | 0 | 0 |
| 1789227323 | 469 Volts | 626 Deg.F | 0 | 0 | 0 |
| 1789227294 | 474 Volts | 626 Deg.F | 0 | 0 | 0 |
| 1789227289 | 476 Volts | 626 Deg.F | 0 | 0 | 0 |
| 1789227259 | 468 Volts | 626 Deg.F | 0 | 0 | 0 |
| 1789227229 | 474 Volts | 626 Deg.F | 0 | 0 | 0 |
| 1789227199 | 470 Volts | 626 Deg.F | 0 | 0 | 0 |
| 1789227169 | 471 Volts | 626 Deg.F | 0 | 0 | 0 |
| 1789227139 | 470 Volts | 625 Deg.F | 0 | 0 | 0 |
| 1789227108 | 475 Volts | 625 Deg.F | 0 | 0 | 0 |
| 1789227098 | 472 Volts | 625 Deg.F | 0 | 0 | 0 |
| 1789227053 | 471 Volts | 625 Deg.F | 0 | 0 | 0 |
| 1789227022 | 474 Volts | 625 Deg.F | 0 | 0 | 0 |
| 1789226991 | 476 Volts | 625 Deg.F | 0 | 0 | 0 |
| 1789226961 | 467 Volts | 625 Deg.F | 0 | 0 | 0 |
| 1789226931 | 471 Volts | 624 Deg.F | 0 | 0 | 0 |
| 1789226900 | 471 Volts | 624 Deg.F | 0 | 0 | 0 |
| 1789226870 | 473 Volts | 624 Deg.F | 0 | 0 | 0 |
| 1789226779 | 471 Volts | 623 Deg.F | 0 | 0 | 0 |
| 1789226688 | 480 Volts | 626 Deg.F | 0 | 0 | 0 |
| 1789226657 | 471 Volts | 623 Deg.F | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)