This is the latest recevied telemetry packets stored in our database for station/object EB5KT-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1791002803 | 13 Count | 942 Count | 0 Count | 0 VDC | 0 VDC |
| 1791001000 | 12 Count | 872 Count | 0 Count | 0 VDC | 0 VDC |
| 1790999197 | 11 Count | 805 Count | 0 Count | 0 VDC | 0 VDC |
| 1790997394 | 10 Count | 725 Count | 0 Count | 0 VDC | 0 VDC |
| 1790995591 | 9 Count | 661 Count | 0 Count | 0 VDC | 0 VDC |
| 1790993788 | 8 Count | 600 Count | 0 Count | 0 VDC | 0 VDC |
| 1790992022 | 7 Count | 534 Count | 0 Count | 0 VDC | 0 VDC |
| 1790990219 | 6 Count | 464 Count | 0 Count | 0 VDC | 0 VDC |
| 1790988415 | 5 Count | 398 Count | 0 Count | 0 VDC | 0 VDC |
| 1790986612 | 4 Count | 328 Count | 0 Count | 0 VDC | 0 VDC |
| 1790984809 | 3 Count | 266 Count | 0 Count | 0 VDC | 0 VDC |
| 1790983006 | 2 Count | 204 Count | 0 Count | 0 VDC | 0 VDC |
| 1790981202 | 1 Count | 142 Count | 0 Count | 0 VDC | 0 VDC |
| 1790979399 | 0 Count | 73 Count | 0 Count | 0 VDC | 0 VDC |
| 1790977596 | 12 Count | 1001 Count | 0 Count | 0 VDC | 0 VDC |
| 1790975793 | 11 Count | 921 Count | 0 Count | 0 VDC | 0 VDC |
| 1790973990 | 10 Count | 849 Count | 0 Count | 0 VDC | 0 VDC |
| 1790972187 | 9 Count | 774 Count | 0 Count | 0 VDC | 0 VDC |
| 1790970421 | 8 Count | 701 Count | 0 Count | 0 VDC | 0 VDC |
| 1790968618 | 7 Count | 628 Count | 0 Count | 0 VDC | 0 VDC |
| 1790966815 | 6 Count | 559 Count | 0 Count | 0 VDC | 0 VDC |
| 1790965012 | 5 Count | 467 Count | 0 Count | 0 VDC | 0 VDC |
| 1790963209 | 4 Count | 391 Count | 0 Count | 0 VDC | 0 VDC |
| 1790961406 | 3 Count | 313 Count | 0 Count | 0 VDC | 0 VDC |
| 1790959602 | 2 Count | 243 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)