This is the latest recevied telemetry packets stored in our database for station/object SP8PRZ-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1788060682 | 489 Count | 478 Count | 428 Count | 0 VDC | 0 VDC |
| 1788058280 | 485 Count | 476 Count | 426 Count | 0 VDC | 0 VDC |
| 1788055878 | 480 Count | 473 Count | 423 Count | 0 VDC | 0 VDC |
| 1788053476 | 476 Count | 471 Count | 421 Count | 0 VDC | 0 VDC |
| 1788051074 | 472 Count | 469 Count | 419 Count | 0 VDC | 0 VDC |
| 1788048672 | 467 Count | 466 Count | 416 Count | 0 VDC | 0 VDC |
| 1788046270 | 462 Count | 463 Count | 413 Count | 0 VDC | 0 VDC |
| 1788043869 | 458 Count | 461 Count | 411 Count | 0 VDC | 0 VDC |
| 1788041467 | 453 Count | 458 Count | 408 Count | 0 VDC | 0 VDC |
| 1788039081 | 448 Count | 455 Count | 405 Count | 0 VDC | 0 VDC |
| 1788036680 | 444 Count | 453 Count | 403 Count | 0 VDC | 0 VDC |
| 1788034278 | 440 Count | 451 Count | 401 Count | 0 VDC | 0 VDC |
| 1788031876 | 435 Count | 448 Count | 398 Count | 0 VDC | 0 VDC |
| 1788029474 | 431 Count | 446 Count | 396 Count | 0 VDC | 0 VDC |
| 1788027073 | 426 Count | 443 Count | 393 Count | 0 VDC | 0 VDC |
| 1788024671 | 421 Count | 440 Count | 390 Count | 0 VDC | 0 VDC |
| 1788022269 | 417 Count | 438 Count | 388 Count | 0 VDC | 0 VDC |
| 1788019867 | 412 Count | 435 Count | 385 Count | 0 VDC | 0 VDC |
| 1788018470 | 408 Count | 433 Count | 383 Count | 0 VDC | 0 VDC |
| 1788016068 | 404 Count | 431 Count | 381 Count | 0 VDC | 0 VDC |
| 1788013666 | 371 Count | 400 Count | 350 Count | 0 VDC | 0 VDC |
| 1788011264 | 320 Count | 351 Count | 301 Count | 0 VDC | 0 VDC |
| 1788008862 | 272 Count | 305 Count | 255 Count | 0 VDC | 0 VDC |
| 1788006461 | 208 Count | 243 Count | 193 Count | 0 VDC | 0 VDC |
| 1788004059 | 168 Count | 205 Count | 155 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)