This is the latest recevied telemetry packets stored in our database for station/object SQ7AYZ-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1788094686 | 105 Count | 309 Count | 91 Count | 0 VDC | 0 VDC |
| 1788092885 | 102 Count | 307 Count | 89 Count | 0 VDC | 0 VDC |
| 1788091094 | 99 Count | 305 Count | 87 Count | 0 VDC | 0 VDC |
| 1788089294 | 96 Count | 303 Count | 85 Count | 0 VDC | 0 VDC |
| 1788087493 | 93 Count | 301 Count | 83 Count | 0 VDC | 0 VDC |
| 1788085692 | 90 Count | 299 Count | 81 Count | 0 VDC | 0 VDC |
| 1788083891 | 87 Count | 297 Count | 79 Count | 0 VDC | 0 VDC |
| 1788082091 | 84 Count | 295 Count | 77 Count | 0 VDC | 0 VDC |
| 1788080290 | 81 Count | 293 Count | 75 Count | 0 VDC | 0 VDC |
| 1788078489 | 78 Count | 291 Count | 73 Count | 0 VDC | 0 VDC |
| 1788076687 | 75 Count | 289 Count | 71 Count | 0 VDC | 0 VDC |
| 1788074886 | 72 Count | 287 Count | 69 Count | 0 VDC | 0 VDC |
| 1788073086 | 65 Count | 275 Count | 63 Count | 0 VDC | 0 VDC |
| 1788071285 | 47 Count | 193 Count | 46 Count | 0 VDC | 0 VDC |
| 1788069494 | 25 Count | 89 Count | 25 Count | 0 VDC | 0 VDC |
| 1788067693 | 244 Count | 1015 Count | 234 Count | 0 VDC | 0 VDC |
| 1788065893 | 219 Count | 924 Count | 210 Count | 0 VDC | 0 VDC |
| 1788064092 | 196 Count | 817 Count | 188 Count | 0 VDC | 0 VDC |
| 1788062291 | 164 Count | 709 Count | 157 Count | 0 VDC | 0 VDC |
| 1788060491 | 145 Count | 629 Count | 139 Count | 0 VDC | 0 VDC |
| 1788058690 | 120 Count | 518 Count | 115 Count | 0 VDC | 0 VDC |
| 1788056889 | 102 Count | 420 Count | 98 Count | 0 VDC | 0 VDC |
| 1788055089 | 75 Count | 313 Count | 72 Count | 0 VDC | 0 VDC |
| 1788053288 | 51 Count | 214 Count | 49 Count | 0 VDC | 0 VDC |
| 1788051487 | 23 Count | 101 Count | 22 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)