This is the latest recevied telemetry packets stored in our database for station/object SQ7AYZ-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1791020863 | 83 Count | 420 Count | 76 Count | 0 VDC | 0 VDC |
| 1791019063 | 82 Count | 420 Count | 76 Count | 0 VDC | 0 VDC |
| 1791017262 | 78 Count | 407 Count | 73 Count | 0 VDC | 0 VDC |
| 1791015461 | 74 Count | 385 Count | 70 Count | 0 VDC | 0 VDC |
| 1791013661 | 65 Count | 313 Count | 62 Count | 0 VDC | 0 VDC |
| 1791011860 | 53 Count | 272 Count | 51 Count | 0 VDC | 0 VDC |
| 1791010060 | 46 Count | 194 Count | 45 Count | 0 VDC | 0 VDC |
| 1791008266 | 26 Count | 101 Count | 26 Count | 0 VDC | 0 VDC |
| 1791006465 | 261 Count | 1003 Count | 253 Count | 0 VDC | 0 VDC |
| 1791004665 | 223 Count | 866 Count | 216 Count | 0 VDC | 0 VDC |
| 1791002864 | 178 Count | 695 Count | 172 Count | 0 VDC | 0 VDC |
| 1791001063 | 133 Count | 552 Count | 128 Count | 0 VDC | 0 VDC |
| 1790999263 | 105 Count | 427 Count | 101 Count | 0 VDC | 0 VDC |
| 1790997462 | 72 Count | 316 Count | 69 Count | 0 VDC | 0 VDC |
| 1790995662 | 44 Count | 194 Count | 42 Count | 0 VDC | 0 VDC |
| 1790993861 | 22 Count | 107 Count | 21 Count | 0 VDC | 0 VDC |
| 1790992060 | 10 Count | 35 Count | 10 Count | 0 VDC | 0 VDC |
| 1790990260 | 484 Count | 1004 Count | 430 Count | 0 VDC | 0 VDC |
| 1790988459 | 478 Count | 994 Count | 425 Count | 0 VDC | 0 VDC |
| 1790986665 | 473 Count | 982 Count | 421 Count | 0 VDC | 0 VDC |
| 1790984865 | 466 Count | 959 Count | 415 Count | 0 VDC | 0 VDC |
| 1790983064 | 457 Count | 910 Count | 407 Count | 0 VDC | 0 VDC |
| 1790981264 | 447 Count | 872 Count | 398 Count | 0 VDC | 0 VDC |
| 1790979463 | 436 Count | 836 Count | 388 Count | 0 VDC | 0 VDC |
| 1790977662 | 426 Count | 802 Count | 379 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)