This is the latest recevied telemetry packets stored in our database for station/object SQ7AYZ-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1793324355 | 550 Count | 219 Count | 140 Count | 0 VDC | 0 VDC |
| 1793322555 | 549 Count | 219 Count | 140 Count | 0 VDC | 0 VDC |
| 1793320754 | 548 Count | 219 Count | 140 Count | 0 VDC | 0 VDC |
| 1793318959 | 547 Count | 219 Count | 140 Count | 0 VDC | 0 VDC |
| 1793317158 | 546 Count | 219 Count | 140 Count | 0 VDC | 0 VDC |
| 1793315357 | 545 Count | 219 Count | 140 Count | 0 VDC | 0 VDC |
| 1793313557 | 544 Count | 219 Count | 140 Count | 0 VDC | 0 VDC |
| 1793311756 | 543 Count | 219 Count | 140 Count | 0 VDC | 0 VDC |
| 1793309955 | 542 Count | 219 Count | 140 Count | 0 VDC | 0 VDC |
| 1793308155 | 541 Count | 219 Count | 140 Count | 0 VDC | 0 VDC |
| 1793306354 | 540 Count | 219 Count | 140 Count | 0 VDC | 0 VDC |
| 1793304553 | 539 Count | 219 Count | 140 Count | 0 VDC | 0 VDC |
| 1793302753 | 538 Count | 219 Count | 140 Count | 0 VDC | 0 VDC |
| 1793300952 | 537 Count | 219 Count | 140 Count | 0 VDC | 0 VDC |
| 1793275758 | 518 Count | 214 Count | 135 Count | 0 VDC | 0 VDC |
| 1793273957 | 516 Count | 213 Count | 134 Count | 0 VDC | 0 VDC |
| 1793272157 | 515 Count | 213 Count | 134 Count | 0 VDC | 0 VDC |
| 1793270356 | 514 Count | 213 Count | 134 Count | 0 VDC | 0 VDC |
| 1793268556 | 513 Count | 213 Count | 134 Count | 0 VDC | 0 VDC |
| 1793266755 | 512 Count | 213 Count | 134 Count | 0 VDC | 0 VDC |
| 1793264954 | 511 Count | 213 Count | 134 Count | 0 VDC | 0 VDC |
| 1793263153 | 510 Count | 213 Count | 134 Count | 0 VDC | 0 VDC |
| 1793261353 | 509 Count | 213 Count | 134 Count | 0 VDC | 0 VDC |
| 1793259552 | 508 Count | 213 Count | 134 Count | 0 VDC | 0 VDC |
| 1793257752 | 507 Count | 213 Count | 134 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)