This is the latest recevied telemetry packets stored in our database for station/object 9W8ASH-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1782061554 | 474 Count | 896 Count | 471 Count | 0 VDC | 0 VDC |
| 1782054350 | 368 Count | 639 Count | 366 Count | 0 VDC | 0 VDC |
| 1782047147 | 262 Count | 463 Count | 261 Count | 0 VDC | 0 VDC |
| 1782039953 | 110 Count | 192 Count | 110 Count | 0 VDC | 0 VDC |
| 1782032753 | 511 Count | 1152 Count | 507 Count | 0 VDC | 0 VDC |
| 1782025545 | 371 Count | 770 Count | 368 Count | 0 VDC | 0 VDC |
| 1782018356 | 272 Count | 548 Count | 270 Count | 0 VDC | 0 VDC |
| 1782003949 | 0 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1781996752 | 454 Count | 789 Count | 449 Count | 0 VDC | 0 VDC |
| 1781989548 | 349 Count | 627 Count | 345 Count | 0 VDC | 0 VDC |
| 1781982345 | 267 Count | 490 Count | 264 Count | 0 VDC | 0 VDC |
| 1781975151 | 183 Count | 346 Count | 181 Count | 0 VDC | 0 VDC |
| 1781967947 | 95 Count | 197 Count | 94 Count | 0 VDC | 0 VDC |
| 1781960744 | 0 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1781953554 | 482 Count | 959 Count | 479 Count | 0 VDC | 0 VDC |
| 1781946350 | 353 Count | 718 Count | 351 Count | 0 VDC | 0 VDC |
| 1781939146 | 206 Count | 466 Count | 205 Count | 0 VDC | 0 VDC |
| 1781931957 | 99 Count | 256 Count | 99 Count | 0 VDC | 0 VDC |
| 1781924750 | 616 Count | 1166 Count | 609 Count | 0 VDC | 0 VDC |
| 1781917550 | 517 Count | 961 Count | 511 Count | 0 VDC | 0 VDC |
| 1781910352 | 424 Count | 776 Count | 419 Count | 0 VDC | 0 VDC |
| 1781903148 | 343 Count | 618 Count | 339 Count | 0 VDC | 0 VDC |
| 1781895944 | 275 Count | 492 Count | 272 Count | 0 VDC | 0 VDC |
| 1781888747 | 190 Count | 339 Count | 188 Count | 0 VDC | 0 VDC |
| 1781881544 | 104 Count | 188 Count | 103 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)