This is the latest recevied telemetry packets stored in our database for station/object IU1VDW-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1788138005 | 0 Count | 326 Count | 0 Count | 0 VDC | 0 VDC |
| 1788137105 | 0 Count | 321 Count | 0 Count | 0 VDC | 0 VDC |
| 1788136205 | 0 Count | 315 Count | 0 Count | 0 VDC | 0 VDC |
| 1788135305 | 0 Count | 309 Count | 0 Count | 0 VDC | 0 VDC |
| 1788134404 | 0 Count | 304 Count | 0 Count | 0 VDC | 0 VDC |
| 1788133504 | 0 Count | 299 Count | 0 Count | 0 VDC | 0 VDC |
| 1788132604 | 0 Count | 293 Count | 0 Count | 0 VDC | 0 VDC |
| 1788131704 | 0 Count | 288 Count | 0 Count | 0 VDC | 0 VDC |
| 1788130803 | 0 Count | 287 Count | 0 Count | 0 VDC | 0 VDC |
| 1788129903 | 0 Count | 282 Count | 0 Count | 0 VDC | 0 VDC |
| 1788129003 | 0 Count | 278 Count | 0 Count | 0 VDC | 0 VDC |
| 1788128103 | 0 Count | 272 Count | 0 Count | 0 VDC | 0 VDC |
| 1788127203 | 0 Count | 269 Count | 0 Count | 0 VDC | 0 VDC |
| 1788126303 | 0 Count | 262 Count | 0 Count | 0 VDC | 0 VDC |
| 1788125403 | 0 Count | 256 Count | 0 Count | 0 VDC | 0 VDC |
| 1788124503 | 0 Count | 250 Count | 0 Count | 0 VDC | 0 VDC |
| 1788123603 | 0 Count | 248 Count | 0 Count | 0 VDC | 0 VDC |
| 1788122703 | 0 Count | 243 Count | 0 Count | 0 VDC | 0 VDC |
| 1788121803 | 0 Count | 237 Count | 0 Count | 0 VDC | 0 VDC |
| 1788120903 | 0 Count | 232 Count | 0 Count | 0 VDC | 0 VDC |
| 1788120003 | 0 Count | 229 Count | 0 Count | 0 VDC | 0 VDC |
| 1788119103 | 0 Count | 222 Count | 0 Count | 0 VDC | 0 VDC |
| 1788118203 | 0 Count | 216 Count | 0 Count | 0 VDC | 0 VDC |
| 1788117303 | 0 Count | 212 Count | 0 Count | 0 VDC | 0 VDC |
| 1788116409 | 0 Count | 206 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)