This is the latest recevied telemetry packets stored in our database for station/object IK1TTD-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1792561275 | 302 Count | 702 Count | 280 Count | 0 VDC | 0 VDC |
| 1792557669 | 274 Count | 648 Count | 254 Count | 0 VDC | 0 VDC |
| 1792554062 | 246 Count | 593 Count | 228 Count | 0 VDC | 0 VDC |
| 1792550493 | 218 Count | 541 Count | 202 Count | 0 VDC | 0 VDC |
| 1792546886 | 190 Count | 483 Count | 176 Count | 0 VDC | 0 VDC |
| 1792543279 | 165 Count | 422 Count | 153 Count | 0 VDC | 0 VDC |
| 1792539670 | 141 Count | 359 Count | 131 Count | 0 VDC | 0 VDC |
| 1792536064 | 116 Count | 290 Count | 108 Count | 0 VDC | 0 VDC |
| 1792532457 | 87 Count | 218 Count | 81 Count | 0 VDC | 0 VDC |
| 1792528891 | 60 Count | 150 Count | 56 Count | 0 VDC | 0 VDC |
| 1792525284 | 32 Count | 80 Count | 30 Count | 0 VDC | 0 VDC |
| 1792521678 | 14 Count | 37 Count | 14 Count | 0 VDC | 0 VDC |
| 1792518071 | 423 Count | 999 Count | 395 Count | 0 VDC | 0 VDC |
| 1792514465 | 392 Count | 924 Count | 366 Count | 0 VDC | 0 VDC |
| 1792510858 | 364 Count | 858 Count | 340 Count | 0 VDC | 0 VDC |
| 1792485696 | 152 Count | 371 Count | 142 Count | 0 VDC | 0 VDC |
| 1792482089 | 126 Count | 300 Count | 118 Count | 0 VDC | 0 VDC |
| 1792478482 | 102 Count | 238 Count | 96 Count | 0 VDC | 0 VDC |
| 1792474872 | 68 Count | 167 Count | 64 Count | 0 VDC | 0 VDC |
| 1792471265 | 40 Count | 101 Count | 38 Count | 0 VDC | 0 VDC |
| 1792467659 | 13 Count | 38 Count | 13 Count | 0 VDC | 0 VDC |
| 1792442487 | 243 Count | 567 Count | 227 Count | 0 VDC | 0 VDC |
| 1792438880 | 215 Count | 500 Count | 201 Count | 0 VDC | 0 VDC |
| 1792435274 | 187 Count | 434 Count | 175 Count | 0 VDC | 0 VDC |
| 1792431667 | 159 Count | 365 Count | 149 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)