This is the latest recevied telemetry packets stored in our database for station/object IK1TTD-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1794191805 | 26 Count | 69 Count | 25 Count | 0 VDC | 0 VDC |
| 1794188197 | 445 Count | 1022 Count | 412 Count | 0 VDC | 0 VDC |
| 1794184590 | 418 Count | 932 Count | 387 Count | 0 VDC | 0 VDC |
| 1794177429 | 364 Count | 824 Count | 337 Count | 0 VDC | 0 VDC |
| 1794173822 | 336 Count | 777 Count | 311 Count | 0 VDC | 0 VDC |
| 1794170215 | 309 Count | 722 Count | 286 Count | 0 VDC | 0 VDC |
| 1794166609 | 281 Count | 673 Count | 260 Count | 0 VDC | 0 VDC |
| 1794162995 | 256 Count | 619 Count | 237 Count | 0 VDC | 0 VDC |
| 1794159388 | 229 Count | 561 Count | 212 Count | 0 VDC | 0 VDC |
| 1794155817 | 205 Count | 503 Count | 190 Count | 0 VDC | 0 VDC |
| 1794152210 | 180 Count | 444 Count | 167 Count | 0 VDC | 0 VDC |
| 1794148604 | 151 Count | 375 Count | 140 Count | 0 VDC | 0 VDC |
| 1794141388 | 101 Count | 250 Count | 94 Count | 0 VDC | 0 VDC |
| 1794137782 | 77 Count | 185 Count | 72 Count | 0 VDC | 0 VDC |
| 1794134216 | 52 Count | 116 Count | 49 Count | 0 VDC | 0 VDC |
| 1794130609 | 26 Count | 62 Count | 25 Count | 0 VDC | 0 VDC |
| 1794127001 | 413 Count | 1023 Count | 383 Count | 0 VDC | 0 VDC |
| 1794123394 | 388 Count | 971 Count | 360 Count | 0 VDC | 0 VDC |
| 1794119788 | 360 Count | 915 Count | 334 Count | 0 VDC | 0 VDC |
| 1794116181 | 332 Count | 859 Count | 308 Count | 0 VDC | 0 VDC |
| 1794112615 | 305 Count | 798 Count | 283 Count | 0 VDC | 0 VDC |
| 1794109009 | 277 Count | 731 Count | 257 Count | 0 VDC | 0 VDC |
| 1794105402 | 248 Count | 663 Count | 230 Count | 0 VDC | 0 VDC |
| 1794101796 | 220 Count | 593 Count | 204 Count | 0 VDC | 0 VDC |
| 1794098189 | 192 Count | 528 Count | 178 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)