This is the latest recevied telemetry packets stored in our database for station/object SP9CXD-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1794942400 | 228 Count | 732 Count | 0 Count | 3.54 VDC | 0 VDC |
| 1794941799 | 227 Count | 730 Count | 0 Count | 3.54 VDC | 0 VDC |
| 1794941198 | 226 Count | 728 Count | 0 Count | 3.54 VDC | 0 VDC |
| 1794940597 | 225 Count | 727 Count | 0 Count | 3.54 VDC | 0 VDC |
| 1794939996 | 224 Count | 725 Count | 0 Count | 3.55 VDC | 0 VDC |
| 1794939396 | 223 Count | 723 Count | 0 Count | 3.45 VDC | 0 VDC |
| 1794938795 | 222 Count | 721 Count | 0 Count | 3.52 VDC | 0 VDC |
| 1794938215 | 221 Count | 720 Count | 0 Count | 3.55 VDC | 0 VDC |
| 1794937615 | 220 Count | 716 Count | 0 Count | 3.52 VDC | 0 VDC |
| 1794935813 | 217 Count | 711 Count | 0 Count | 3.55 VDC | 0 VDC |
| 1794935212 | 216 Count | 709 Count | 0 Count | 3.55 VDC | 0 VDC |
| 1794934611 | 215 Count | 708 Count | 0 Count | 3.55 VDC | 0 VDC |
| 1794934011 | 214 Count | 707 Count | 0 Count | 3.55 VDC | 0 VDC |
| 1794933410 | 213 Count | 707 Count | 0 Count | 3.55 VDC | 0 VDC |
| 1794932809 | 212 Count | 706 Count | 0 Count | 3.55 VDC | 0 VDC |
| 1794932209 | 211 Count | 704 Count | 0 Count | 3.55 VDC | 0 VDC |
| 1794931608 | 210 Count | 702 Count | 0 Count | 3.51 VDC | 0 VDC |
| 1794931007 | 209 Count | 699 Count | 0 Count | 3.56 VDC | 0 VDC |
| 1794930407 | 208 Count | 696 Count | 0 Count | 3.56 VDC | 0 VDC |
| 1794928004 | 204 Count | 676 Count | 0 Count | 3.55 VDC | 0 VDC |
| 1794927403 | 203 Count | 674 Count | 0 Count | 3.57 VDC | 0 VDC |
| 1794926803 | 202 Count | 671 Count | 0 Count | 3.57 VDC | 0 VDC |
| 1794926202 | 201 Count | 668 Count | 0 Count | 3.57 VDC | 0 VDC |
| 1794925601 | 200 Count | 667 Count | 0 Count | 3.57 VDC | 0 VDC |
| 1794925001 | 199 Count | 664 Count | 0 Count | 3.56 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)