This is the latest recevied telemetry packets stored in our database for station/object SP4SAS-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1788098865 | 137 Count | 178 Count | 115 Count | 0 VDC | 0 VDC |
| 1788097964 | 132 Count | 171 Count | 111 Count | 0 VDC | 0 VDC |
| 1788097064 | 127 Count | 165 Count | 107 Count | 0 VDC | 0 VDC |
| 1788096163 | 121 Count | 157 Count | 102 Count | 0 VDC | 0 VDC |
| 1788095262 | 106 Count | 140 Count | 88 Count | 0 VDC | 0 VDC |
| 1788094362 | 97 Count | 129 Count | 80 Count | 0 VDC | 0 VDC |
| 1788093461 | 92 Count | 123 Count | 76 Count | 0 VDC | 0 VDC |
| 1788092560 | 86 Count | 115 Count | 71 Count | 0 VDC | 0 VDC |
| 1788091659 | 81 Count | 109 Count | 67 Count | 0 VDC | 0 VDC |
| 1788090759 | 63 Count | 88 Count | 50 Count | 0 VDC | 0 VDC |
| 1788089858 | 56 Count | 79 Count | 44 Count | 0 VDC | 0 VDC |
| 1788088957 | 50 Count | 71 Count | 39 Count | 0 VDC | 0 VDC |
| 1788088057 | 45 Count | 66 Count | 35 Count | 0 VDC | 0 VDC |
| 1788087156 | 39 Count | 59 Count | 30 Count | 0 VDC | 0 VDC |
| 1788086255 | 34 Count | 53 Count | 26 Count | 0 VDC | 0 VDC |
| 1788085370 | 22 Count | 40 Count | 19 Count | 0 VDC | 0 VDC |
| 1788084469 | 16 Count | 31 Count | 14 Count | 0 VDC | 0 VDC |
| 1788083569 | 10 Count | 19 Count | 9 Count | 0 VDC | 0 VDC |
| 1788082668 | 5 Count | 11 Count | 5 Count | 0 VDC | 0 VDC |
| 1788081767 | 310 Count | 1003 Count | 276 Count | 0 VDC | 0 VDC |
| 1788080867 | 304 Count | 994 Count | 271 Count | 0 VDC | 0 VDC |
| 1788079966 | 299 Count | 988 Count | 267 Count | 0 VDC | 0 VDC |
| 1788079065 | 293 Count | 979 Count | 262 Count | 0 VDC | 0 VDC |
| 1788078165 | 278 Count | 957 Count | 248 Count | 0 VDC | 0 VDC |
| 1788077264 | 272 Count | 949 Count | 243 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)