This is the latest recevied telemetry packets stored in our database for station/object SP4SAS-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1794986042 | 468 Count | 876 Count | 391 Count | 0 VDC | 0 VDC |
| 1794985141 | 460 Count | 862 Count | 384 Count | 0 VDC | 0 VDC |
| 1794984241 | 452 Count | 850 Count | 377 Count | 0 VDC | 0 VDC |
| 1794983340 | 443 Count | 834 Count | 369 Count | 0 VDC | 0 VDC |
| 1794982439 | 436 Count | 820 Count | 363 Count | 0 VDC | 0 VDC |
| 1794981539 | 427 Count | 805 Count | 355 Count | 0 VDC | 0 VDC |
| 1794980638 | 419 Count | 789 Count | 348 Count | 0 VDC | 0 VDC |
| 1794979737 | 411 Count | 775 Count | 341 Count | 0 VDC | 0 VDC |
| 1794978837 | 403 Count | 762 Count | 334 Count | 0 VDC | 0 VDC |
| 1794977936 | 386 Count | 734 Count | 318 Count | 0 VDC | 0 VDC |
| 1794977035 | 371 Count | 712 Count | 304 Count | 0 VDC | 0 VDC |
| 1794976150 | 358 Count | 695 Count | 296 Count | 0 VDC | 0 VDC |
| 1794975249 | 331 Count | 653 Count | 270 Count | 0 VDC | 0 VDC |
| 1794974349 | 321 Count | 637 Count | 261 Count | 0 VDC | 0 VDC |
| 1794973448 | 312 Count | 623 Count | 253 Count | 0 VDC | 0 VDC |
| 1794972547 | 303 Count | 607 Count | 245 Count | 0 VDC | 0 VDC |
| 1794971647 | 294 Count | 592 Count | 237 Count | 0 VDC | 0 VDC |
| 1794970746 | 286 Count | 576 Count | 230 Count | 0 VDC | 0 VDC |
| 1794969845 | 277 Count | 561 Count | 222 Count | 0 VDC | 0 VDC |
| 1794968944 | 267 Count | 545 Count | 213 Count | 0 VDC | 0 VDC |
| 1794968044 | 259 Count | 533 Count | 206 Count | 0 VDC | 0 VDC |
| 1794967143 | 251 Count | 518 Count | 199 Count | 0 VDC | 0 VDC |
| 1794966242 | 242 Count | 504 Count | 191 Count | 0 VDC | 0 VDC |
| 1794965342 | 236 Count | 491 Count | 186 Count | 0 VDC | 0 VDC |
| 1794964441 | 227 Count | 477 Count | 178 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)