This is the latest recevied telemetry packets stored in our database for station/object SR2GG-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 03/17/2025 5:35:25 AM+00:00 | 791 Count | 1095 Count | 783 Count | 2.41 VDC | 0 VDC |
| 03/17/2025 5:10:25 AM+00:00 | 682 Count | 925 Count | 675 Count | 2.47 VDC | 0 VDC |
| 03/17/2025 4:45:24 AM+00:00 | 593 Count | 770 Count | 587 Count | 2.52 VDC | 0 VDC |
| 03/17/2025 4:20:23 AM+00:00 | 528 Count | 681 Count | 523 Count | 2.25 VDC | 0 VDC |
| 03/17/2025 3:55:23 AM+00:00 | 433 Count | 552 Count | 429 Count | 2.5 VDC | 0 VDC |
| 03/17/2025 3:30:22 AM+00:00 | 350 Count | 450 Count | 347 Count | 2.45 VDC | 0 VDC |
| 03/17/2025 3:05:21 AM+00:00 | 265 Count | 341 Count | 263 Count | 2.57 VDC | 0 VDC |
| 03/17/2025 2:40:21 AM+00:00 | 171 Count | 220 Count | 170 Count | 2.5 VDC | 0 VDC |
| 03/17/2025 2:15:20 AM+00:00 | 88 Count | 111 Count | 88 Count | 2.42 VDC | 0 VDC |
| 03/17/2025 1:50:20 AM+00:00 | 797 Count | 1042 Count | 786 Count | 2.32 VDC | 0 VDC |
| 03/17/2025 1:25:19 AM+00:00 | 711 Count | 932 Count | 701 Count | 2.56 VDC | 0 VDC |
| 03/17/2025 1:00:18 AM+00:00 | 653 Count | 857 Count | 644 Count | 2.55 VDC | 0 VDC |
| 03/17/2025 12:35:18 AM+00:00 | 588 Count | 772 Count | 580 Count | 2.42 VDC | 0 VDC |
| 03/17/2025 12:25:26 AM+00:00 | 562 Count | 740 Count | 555 Count | 2.65 VDC | 0 VDC |
| 03/17/2025 12:00:25 AM+00:00 | 505 Count | 671 Count | 499 Count | 2.42 VDC | 0 VDC |
| 03/16/2025 11:35:25 PM+00:00 | 433 Count | 573 Count | 428 Count | 2.56 VDC | 0 VDC |
| 03/16/2025 11:10:24 PM+00:00 | 346 Count | 457 Count | 342 Count | 2.67 VDC | 0 VDC |
| 03/16/2025 10:45:23 PM+00:00 | 264 Count | 356 Count | 261 Count | 2.67 VDC | 0 VDC |
| 03/16/2025 10:20:23 PM+00:00 | 188 Count | 257 Count | 186 Count | 2.53 VDC | 0 VDC |
| 03/16/2025 9:55:22 PM+00:00 | 110 Count | 151 Count | 109 Count | 2.53 VDC | 0 VDC |
| 03/16/2025 9:30:21 PM+00:00 | 47 Count | 66 Count | 47 Count | 2.37 VDC | 0 VDC |
| 03/16/2025 9:05:21 PM+00:00 | 700 Count | 1004 Count | 686 Count | 2.63 VDC | 0 VDC |
| 03/16/2025 8:40:20 PM+00:00 | 644 Count | 925 Count | 631 Count | 2.36 VDC | 0 VDC |
| 03/16/2025 8:15:19 PM+00:00 | 608 Count | 870 Count | 596 Count | 2.4 VDC | 0 VDC |
| 03/16/2025 7:50:19 PM+00:00 | 541 Count | 774 Count | 530 Count | 2.37 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)