This is the latest recevied telemetry packets stored in our database for station/object SQ9P-9. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | rx_cnt* | loss* | rx_tx* | napiecie* | temp* |
---|---|---|---|---|---|
1719670963 | 232 cnt | 138 cnt | 4 cnt | 3.56 V | 29 deg.C |
1719670083 | 230 cnt | 122 cnt | 2 cnt | 3.56 V | 30 deg.C |
1719664845 | 199 cnt | 253 cnt | 3 cnt | 3.55 V | 29 deg.C |
1719662226 | 176 cnt | 172 cnt | 5 cnt | 3.55 V | 29 deg.C |
1719660488 | 165 cnt | 122 cnt | 1 cnt | 3.56 V | 29 deg.C |
1719658735 | 157 cnt | 74 cnt | 1 cnt | 3.56 V | 29 deg.C |
1719656116 | 137 cnt | 7 cnt | 1 cnt | 3.56 V | 29 deg.C |
1719651750 | 106 cnt | 144 cnt | 1 cnt | 3.56 V | 29 deg.C |
1719650011 | 98 cnt | 99 cnt | 3 cnt | 3.55 V | 29 deg.C |
1719646513 | 68 cnt | 9 cnt | 4 cnt | 3.55 V | 28 deg.C |
1719643895 | 47 cnt | 176 cnt | 0 cnt | 3.56 V | 28 deg.C |
1719643023 | 39 cnt | 155 cnt | 1 cnt | 3.56 V | 28 deg.C |
1719641278 | 22 cnt | 105 cnt | 1 cnt | 3.56 V | 29 deg.C |
1719639539 | 6 cnt | 54 cnt | 0 cnt | 3.56 V | 29 deg.C |
1719633419 | 226 cnt | 141 cnt | 4 cnt | 3.55 V | 28 deg.C |
1719629928 | 196 cnt | 22 cnt | 0 cnt | 3.56 V | 29 deg.C |
1719627309 | 170 cnt | 196 cnt | 0 cnt | 3.56 V | 29 deg.C |
1719625564 | 157 cnt | 138 cnt | 4 cnt | 3.55 V | 29 deg.C |
1719622946 | 138 cnt | 66 cnt | 0 cnt | 3.56 V | 29 deg.C |
1719621201 | 130 cnt | 11 cnt | 0 cnt | 3.56 V | 28 deg.C |
1719620328 | 125 cnt | 235 cnt | 4 cnt | 3.55 V | 29 deg.C |
1719619455 | 113 cnt | 204 cnt | 4 cnt | 3.55 V | 29 deg.C |
1719618588 | 107 cnt | 178 cnt | 0 cnt | 3.56 V | 29 deg.C |
1719614218 | 74 cnt | 37 cnt | 1 cnt | 3.56 V | 29 deg.C |
1719608115 | 34 cnt | 128 cnt | 2 cnt | 3.56 V | 30 deg.C |
*Used Equation Coefficients:
rx_cnt: 0, 1, 0
loss: 0, 1, 0
rx_tx: 0, 1, 0
napiecie: 0, 0.01569, 0
temp: 0, 1, -128
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)