This is the latest recevied telemetry packets stored in our database for station/object SP9ODT-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1785301361 | 226 Count | 312 Count | 7 Count | 0 VDC | 0 VDC |
| 1785301323 | 225 Count | 311 Count | 7 Count | 0 VDC | 0 VDC |
| 1785242398 | 224 Count | 311 Count | 7 Count | 0 VDC | 0 VDC |
| 1785241798 | 223 Count | 309 Count | 7 Count | 0 VDC | 0 VDC |
| 1785241197 | 222 Count | 306 Count | 7 Count | 0 VDC | 0 VDC |
| 1785240596 | 221 Count | 305 Count | 7 Count | 0 VDC | 0 VDC |
| 1785239996 | 220 Count | 304 Count | 7 Count | 0 VDC | 0 VDC |
| 1785239395 | 219 Count | 301 Count | 7 Count | 0 VDC | 0 VDC |
| 1785238794 | 218 Count | 300 Count | 7 Count | 0 VDC | 0 VDC |
| 1785238193 | 217 Count | 299 Count | 7 Count | 0 VDC | 0 VDC |
| 1785237593 | 216 Count | 296 Count | 7 Count | 0 VDC | 0 VDC |
| 1785236992 | 215 Count | 295 Count | 7 Count | 0 VDC | 0 VDC |
| 1785236391 | 214 Count | 293 Count | 7 Count | 0 VDC | 0 VDC |
| 1785235791 | 213 Count | 290 Count | 7 Count | 0 VDC | 0 VDC |
| 1785235190 | 212 Count | 289 Count | 7 Count | 0 VDC | 0 VDC |
| 1785234589 | 211 Count | 287 Count | 7 Count | 0 VDC | 0 VDC |
| 1785234373 | 210 Count | 287 Count | 7 Count | 0 VDC | 0 VDC |
| 1785228822 | 209 Count | 287 Count | 7 Count | 0 VDC | 0 VDC |
| 1785228522 | 208 Count | 287 Count | 7 Count | 0 VDC | 0 VDC |
| 1785227921 | 207 Count | 287 Count | 7 Count | 0 VDC | 0 VDC |
| 1785227321 | 206 Count | 285 Count | 7 Count | 0 VDC | 0 VDC |
| 1785226720 | 205 Count | 284 Count | 7 Count | 0 VDC | 0 VDC |
| 1785226119 | 204 Count | 284 Count | 7 Count | 0 VDC | 0 VDC |
| 1785225518 | 203 Count | 284 Count | 7 Count | 0 VDC | 0 VDC |
| 1785224918 | 202 Count | 282 Count | 7 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)