This is the latest recevied telemetry packets stored in our database for station/object 9W2GDB-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1782025351 | 469 Count | 843 Count | 414 Count | 3.96 VDC | 0.08 VDC |
| 1782023546 | 466 Count | 838 Count | 412 Count | 3.96 VDC | 0.08 VDC |
| 1782021742 | 462 Count | 822 Count | 409 Count | 3.96 VDC | 0.08 VDC |
| 1782019937 | 456 Count | 812 Count | 404 Count | 3.96 VDC | 0.08 VDC |
| 1782018132 | 453 Count | 807 Count | 402 Count | 3.96 VDC | 0.08 VDC |
| 1782016328 | 450 Count | 802 Count | 400 Count | 3.96 VDC | 0.08 VDC |
| 1782014523 | 447 Count | 797 Count | 398 Count | 3.97 VDC | 0.08 VDC |
| 1782012719 | 444 Count | 790 Count | 396 Count | 3.96 VDC | 0.08 VDC |
| 1782010910 | 431 Count | 772 Count | 384 Count | 3.95 VDC | 0.08 VDC |
| 1782009106 | 428 Count | 767 Count | 382 Count | 3.95 VDC | 0.08 VDC |
| 1782007357 | 425 Count | 762 Count | 380 Count | 3.95 VDC | 0.08 VDC |
| 1782005552 | 422 Count | 757 Count | 378 Count | 3.95 VDC | 0.08 VDC |
| 1782003748 | 419 Count | 752 Count | 376 Count | 3.95 VDC | 0.08 VDC |
| 1782001943 | 416 Count | 747 Count | 374 Count | 3.95 VDC | 0.08 VDC |
| 1782000138 | 413 Count | 742 Count | 372 Count | 3.95 VDC | 0.08 VDC |
| 1781998333 | 405 Count | 733 Count | 365 Count | 3.95 VDC | 0.08 VDC |
| 1781996529 | 400 Count | 691 Count | 361 Count | 3.94 VDC | 0.08 VDC |
| 1781994724 | 395 Count | 681 Count | 357 Count | 3.95 VDC | 0.08 VDC |
| 1781992920 | 392 Count | 676 Count | 355 Count | 3.95 VDC | 0.08 VDC |
| 1781991115 | 389 Count | 671 Count | 353 Count | 3.95 VDC | 0.08 VDC |
| 1781989310 | 386 Count | 666 Count | 351 Count | 3.94 VDC | 0.08 VDC |
| 1781987505 | 383 Count | 661 Count | 349 Count | 3.95 VDC | 0.08 VDC |
| 1781985874 | 380 Count | 656 Count | 347 Count | 3.95 VDC | 0.08 VDC |
| 1781984069 | 377 Count | 651 Count | 345 Count | 3.95 VDC | 0.08 VDC |
| 1781982265 | 374 Count | 646 Count | 343 Count | 3.95 VDC | 0.08 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)