This is the latest recevied telemetry packets stored in our database for station/object SP7TPC-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1792537444 | 605 Count | 852 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1792535643 | 603 Count | 848 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1792533843 | 601 Count | 844 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1792532042 | 599 Count | 840 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1792530241 | 597 Count | 837 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1792528440 | 595 Count | 833 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1792526639 | 593 Count | 829 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1792524839 | 591 Count | 825 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1792523038 | 589 Count | 821 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1792521237 | 587 Count | 818 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1792519436 | 585 Count | 817 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1792517635 | 583 Count | 815 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1792515844 | 581 Count | 813 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1792514043 | 580 Count | 811 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1792512242 | 578 Count | 809 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1792510441 | 577 Count | 807 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1792508640 | 553 Count | 801 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1792506840 | 533 Count | 781 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1792505039 | 507 Count | 761 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1792503238 | 484 Count | 748 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1792501437 | 461 Count | 741 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1792499636 | 460 Count | 739 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1792497835 | 459 Count | 729 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1792496035 | 457 Count | 729 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1792494243 | 438 Count | 728 Count | 0 Count | 4.18 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)