This is the latest recevied telemetry packets stored in our database for station/object SP7TPC-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1789383339 | 140 Count | 189 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1789381538 | 139 Count | 189 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1789379737 | 138 Count | 189 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1789377936 | 137 Count | 189 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1789376136 | 136 Count | 189 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1789374335 | 135 Count | 189 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1789372533 | 134 Count | 189 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1789370742 | 133 Count | 189 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1789368941 | 132 Count | 189 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1789367140 | 131 Count | 189 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1789365339 | 130 Count | 189 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1789363539 | 129 Count | 189 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1789361738 | 128 Count | 178 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1789359937 | 127 Count | 176 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1789358136 | 126 Count | 174 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1789356335 | 125 Count | 172 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1789354534 | 124 Count | 170 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1789352733 | 123 Count | 168 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1789350932 | 122 Count | 166 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1789349142 | 121 Count | 164 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1789347342 | 120 Count | 162 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1789345541 | 119 Count | 160 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1789343740 | 118 Count | 158 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1789341939 | 117 Count | 156 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1789340138 | 116 Count | 154 Count | 0 Count | 4.17 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)