This is the latest recevied telemetry packets stored in our database for station/object SP7WOJ-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1792519482 | 614 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1792517687 | 612 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1792515886 | 610 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1792514085 | 608 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1792512285 | 606 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1792510484 | 603 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1792508683 | 601 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1792506882 | 598 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1792505082 | 596 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1792503286 | 594 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1792501485 | 591 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1792499685 | 590 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1792497884 | 587 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1792496083 | 585 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1792494282 | 582 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1792492481 | 580 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1792490681 | 578 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1792488885 | 575 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1792487085 | 574 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1792485284 | 571 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1792483483 | 569 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1792481682 | 566 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1792479882 | 564 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1792478081 | 562 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1792476280 | 559 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)