This is the latest recevied telemetry packets stored in our database for station/object SP3UW-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1783647959 | 85 Count | 201 Count | 83 Count | 0 VDC | 0 VDC |
| 1783644359 | 55 Count | 132 Count | 54 Count | 0 VDC | 0 VDC |
| 1783640758 | 29 Count | 70 Count | 29 Count | 0 VDC | 0 VDC |
| 1783637157 | 231 Count | 1031 Count | 181 Count | 0 VDC | 0 VDC |
| 1783633556 | 202 Count | 962 Count | 153 Count | 0 VDC | 0 VDC |
| 1783629956 | 179 Count | 905 Count | 131 Count | 0 VDC | 0 VDC |
| 1783629294 | 173 Count | 894 Count | 126 Count | 0 VDC | 0 VDC |
| 1783627494 | 162 Count | 863 Count | 116 Count | 0 VDC | 0 VDC |
| 1783627236 | 159 Count | 858 Count | 114 Count | 0 VDC | 0 VDC |
| 1783626980 | 154 Count | 846 Count | 110 Count | 0 VDC | 0 VDC |
| 1783626837 | 153 Count | 843 Count | 110 Count | 0 VDC | 0 VDC |
| 1783452721 | 145 Count | 807 Count | 106 Count | 0 VDC | 0 VDC |
| 1783452568 | 144 Count | 802 Count | 106 Count | 0 VDC | 0 VDC |
| 1783451198 | 141 Count | 786 Count | 104 Count | 0 VDC | 0 VDC |
| 1783449397 | 138 Count | 764 Count | 102 Count | 0 VDC | 0 VDC |
| 1783447597 | 135 Count | 746 Count | 100 Count | 0 VDC | 0 VDC |
| 1783445795 | 132 Count | 727 Count | 98 Count | 0 VDC | 0 VDC |
| 1783443995 | 131 Count | 709 Count | 98 Count | 0 VDC | 0 VDC |
| 1783442199 | 128 Count | 690 Count | 96 Count | 0 VDC | 0 VDC |
| 1783440398 | 126 Count | 672 Count | 95 Count | 0 VDC | 0 VDC |
| 1783438597 | 125 Count | 655 Count | 95 Count | 0 VDC | 0 VDC |
| 1783436797 | 122 Count | 635 Count | 93 Count | 0 VDC | 0 VDC |
| 1783434996 | 119 Count | 614 Count | 91 Count | 0 VDC | 0 VDC |
| 1783433195 | 117 Count | 613 Count | 90 Count | 0 VDC | 0 VDC |
| 1783431395 | 115 Count | 600 Count | 89 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)