This is the latest recevied telemetry packets stored in our database for station/object G6MXT-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1791458678 | 786 Count | 341 Count | 251 Count | 0 VDC | 0 VDC |
| 1791456875 | 780 Count | 312 Count | 246 Count | 0 VDC | 0 VDC |
| 1791455078 | 772 Count | 280 Count | 239 Count | 0 VDC | 0 VDC |
| 1791454788 | 762 Count | 280 Count | 239 Count | 0 VDC | 0 VDC |
| 1791447849 | 757 Count | 280 Count | 239 Count | 0 VDC | 0 VDC |
| 1791447778 | 752 Count | 280 Count | 239 Count | 0 VDC | 0 VDC |
| 1791447655 | 747 Count | 280 Count | 239 Count | 0 VDC | 0 VDC |
| 1791447518 | 742 Count | 280 Count | 239 Count | 0 VDC | 0 VDC |
| 1791447435 | 737 Count | 280 Count | 239 Count | 0 VDC | 0 VDC |
| 1791446671 | 732 Count | 280 Count | 239 Count | 0 VDC | 0 VDC |
| 1791444868 | 730 Count | 279 Count | 238 Count | 0 VDC | 0 VDC |
| 1791443064 | 728 Count | 278 Count | 237 Count | 0 VDC | 0 VDC |
| 1791441261 | 726 Count | 277 Count | 236 Count | 0 VDC | 0 VDC |
| 1791439458 | 724 Count | 275 Count | 235 Count | 0 VDC | 0 VDC |
| 1791437692 | 715 Count | 271 Count | 231 Count | 0 VDC | 0 VDC |
| 1791435889 | 709 Count | 266 Count | 226 Count | 0 VDC | 0 VDC |
| 1791434086 | 707 Count | 265 Count | 225 Count | 0 VDC | 0 VDC |
| 1791432282 | 705 Count | 264 Count | 224 Count | 0 VDC | 0 VDC |
| 1791430479 | 703 Count | 263 Count | 223 Count | 0 VDC | 0 VDC |
| 1791428676 | 701 Count | 262 Count | 222 Count | 0 VDC | 0 VDC |
| 1791426872 | 699 Count | 261 Count | 221 Count | 0 VDC | 0 VDC |
| 1791425069 | 697 Count | 260 Count | 220 Count | 0 VDC | 0 VDC |
| 1791423266 | 695 Count | 259 Count | 219 Count | 0 VDC | 0 VDC |
| 1791419659 | 691 Count | 257 Count | 217 Count | 0 VDC | 0 VDC |
| 1791417856 | 689 Count | 256 Count | 216 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)