This is the latest recevied telemetry packets stored in our database for station/object SP7KGO-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1783152497 | 346 Count | 480 Count | 236 Count | 3.89 VDC | 0.08 VDC |
| 1783150695 | 342 Count | 477 Count | 234 Count | 3.85 VDC | 0.08 VDC |
| 1783148894 | 340 Count | 476 Count | 234 Count | 3.9 VDC | 0.08 VDC |
| 1783147092 | 338 Count | 475 Count | 233 Count | 3.86 VDC | 0.08 VDC |
| 1783145291 | 335 Count | 475 Count | 233 Count | 3.89 VDC | 0.08 VDC |
| 1783143489 | 333 Count | 474 Count | 232 Count | 3.84 VDC | 0.08 VDC |
| 1783141688 | 331 Count | 474 Count | 232 Count | 3.9 VDC | 0.08 VDC |
| 1783139903 | 329 Count | 473 Count | 232 Count | 3.85 VDC | 0.08 VDC |
| 1783138102 | 327 Count | 473 Count | 232 Count | 3.88 VDC | 0.08 VDC |
| 1783136300 | 325 Count | 472 Count | 232 Count | 3.87 VDC | 0.08 VDC |
| 1783134499 | 323 Count | 470 Count | 231 Count | 3.87 VDC | 0.08 VDC |
| 1783132697 | 320 Count | 468 Count | 231 Count | 3.87 VDC | 0.08 VDC |
| 1783130896 | 319 Count | 467 Count | 231 Count | 3.9 VDC | 0.08 VDC |
| 1783129094 | 316 Count | 466 Count | 231 Count | 3.85 VDC | 0.08 VDC |
| 1783127293 | 312 Count | 462 Count | 229 Count | 3.85 VDC | 0.08 VDC |
| 1783125491 | 305 Count | 451 Count | 224 Count | 3.88 VDC | 0.08 VDC |
| 1783123690 | 299 Count | 439 Count | 220 Count | 3.87 VDC | 0.08 VDC |
| 1783121888 | 291 Count | 423 Count | 213 Count | 3.87 VDC | 0.08 VDC |
| 1783120087 | 285 Count | 417 Count | 210 Count | 3.86 VDC | 0.08 VDC |
| 1783118303 | 280 Count | 407 Count | 206 Count | 3.89 VDC | 0.08 VDC |
| 1783116502 | 270 Count | 391 Count | 199 Count | 3.89 VDC | 0.08 VDC |
| 1783114701 | 263 Count | 379 Count | 193 Count | 3.89 VDC | 0.08 VDC |
| 1783112899 | 249 Count | 358 Count | 182 Count | 3.86 VDC | 0.08 VDC |
| 1783111098 | 238 Count | 341 Count | 172 Count | 3.87 VDC | 0.08 VDC |
| 1783109296 | 233 Count | 331 Count | 170 Count | 3.9 VDC | 0.08 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)