This is the latest recevied telemetry packets stored in our database for station/object SP7KGO-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1791054783 | 629 Count | 408 Count | 330 Count | 3.87 VDC | 0.08 VDC |
| 1791052981 | 623 Count | 404 Count | 327 Count | 3.83 VDC | 0.08 VDC |
| 1791051180 | 620 Count | 402 Count | 325 Count | 3.85 VDC | 0.08 VDC |
| 1791049378 | 615 Count | 400 Count | 323 Count | 3.87 VDC | 0.08 VDC |
| 1791047577 | 611 Count | 398 Count | 321 Count | 3.87 VDC | 0.08 VDC |
| 1791045791 | 606 Count | 396 Count | 319 Count | 3.84 VDC | 0.08 VDC |
| 1791043990 | 603 Count | 394 Count | 317 Count | 3.85 VDC | 0.08 VDC |
| 1791042188 | 600 Count | 392 Count | 315 Count | 3.85 VDC | 0.08 VDC |
| 1791040387 | 595 Count | 390 Count | 313 Count | 3.85 VDC | 0.08 VDC |
| 1791038585 | 592 Count | 388 Count | 311 Count | 3.85 VDC | 0.08 VDC |
| 1791036783 | 587 Count | 386 Count | 309 Count | 3.85 VDC | 0.08 VDC |
| 1791034982 | 584 Count | 384 Count | 307 Count | 3.87 VDC | 0.08 VDC |
| 1791033181 | 579 Count | 382 Count | 305 Count | 3.87 VDC | 0.08 VDC |
| 1791031379 | 576 Count | 380 Count | 303 Count | 3.84 VDC | 0.08 VDC |
| 1791029578 | 571 Count | 378 Count | 301 Count | 3.83 VDC | 0.08 VDC |
| 1791027776 | 568 Count | 376 Count | 299 Count | 3.84 VDC | 0.08 VDC |
| 1791025975 | 564 Count | 374 Count | 297 Count | 3.85 VDC | 0.08 VDC |
| 1791024191 | 560 Count | 372 Count | 295 Count | 3.87 VDC | 0.08 VDC |
| 1791022390 | 557 Count | 370 Count | 293 Count | 3.83 VDC | 0.08 VDC |
| 1791020589 | 553 Count | 368 Count | 291 Count | 3.83 VDC | 0.08 VDC |
| 1791018787 | 549 Count | 366 Count | 289 Count | 3.84 VDC | 0.08 VDC |
| 1791016986 | 544 Count | 364 Count | 287 Count | 3.85 VDC | 0.08 VDC |
| 1791015184 | 541 Count | 362 Count | 285 Count | 3.83 VDC | 0.08 VDC |
| 1791013382 | 536 Count | 360 Count | 283 Count | 3.83 VDC | 0.08 VDC |
| 1791011581 | 530 Count | 353 Count | 278 Count | 3.84 VDC | 0.08 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)