This is the latest recevied telemetry packets stored in our database for station/object SP7KGO. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1782222399 | 215 Count | 676 Count | 145 Count | 4.02 VDC | 0.08 VDC |
| 1782220597 | 212 Count | 674 Count | 143 Count | 4.03 VDC | 0.08 VDC |
| 1782218796 | 208 Count | 672 Count | 141 Count | 4.02 VDC | 0.08 VDC |
| 1782218569 | 206 Count | 671 Count | 140 Count | 4 VDC | 0.08 VDC |
| 1782216768 | 202 Count | 669 Count | 138 Count | 3.95 VDC | 0.08 VDC |
| 1782214966 | 194 Count | 662 Count | 131 Count | 3.92 VDC | 0.08 VDC |
| 1782214718 | 192 Count | 662 Count | 131 Count | 3.92 VDC | 0.08 VDC |
| 1782212916 | 188 Count | 660 Count | 129 Count | 3.81 VDC | 0.08 VDC |
| 1782211115 | 184 Count | 657 Count | 126 Count | 3.84 VDC | 0.08 VDC |
| 1782209313 | 179 Count | 655 Count | 124 Count | 3.85 VDC | 0.08 VDC |
| 1782207511 | 176 Count | 653 Count | 122 Count | 3.86 VDC | 0.08 VDC |
| 1782205710 | 171 Count | 651 Count | 120 Count | 3.86 VDC | 0.08 VDC |
| 1782203908 | 168 Count | 632 Count | 118 Count | 3.87 VDC | 0.08 VDC |
| 1782202128 | 164 Count | 610 Count | 116 Count | 3.87 VDC | 0.08 VDC |
| 1782200326 | 160 Count | 597 Count | 114 Count | 3.87 VDC | 0.08 VDC |
| 1782198524 | 156 Count | 578 Count | 112 Count | 3.88 VDC | 0.08 VDC |
| 1782196723 | 152 Count | 562 Count | 110 Count | 3.89 VDC | 0.08 VDC |
| 1782194921 | 149 Count | 549 Count | 108 Count | 3.89 VDC | 0.08 VDC |
| 1782193120 | 144 Count | 529 Count | 106 Count | 3.89 VDC | 0.08 VDC |
| 1782191318 | 141 Count | 506 Count | 104 Count | 3.9 VDC | 0.08 VDC |
| 1782189517 | 135 Count | 472 Count | 100 Count | 3.9 VDC | 0.08 VDC |
| 1782187715 | 129 Count | 434 Count | 96 Count | 3.91 VDC | 0.08 VDC |
| 1782185913 | 123 Count | 384 Count | 92 Count | 3.92 VDC | 0.08 VDC |
| 1782184112 | 117 Count | 351 Count | 88 Count | 3.92 VDC | 0.08 VDC |
| 1782182310 | 111 Count | 311 Count | 84 Count | 3.94 VDC | 0.08 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)