This is the latest recevied telemetry packets stored in our database for station/object F1IXL-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1782054733 | 80 Count | 186 Count | 71 Count | 0 VDC | 0 VDC |
| 1782054129 | 73 Count | 169 Count | 65 Count | 0 VDC | 0 VDC |
| 1782053525 | 66 Count | 156 Count | 59 Count | 0 VDC | 0 VDC |
| 1782052921 | 57 Count | 134 Count | 51 Count | 0 VDC | 0 VDC |
| 1782052317 | 49 Count | 114 Count | 44 Count | 0 VDC | 0 VDC |
| 1782051110 | 32 Count | 72 Count | 29 Count | 0 VDC | 0 VDC |
| 1782050506 | 24 Count | 56 Count | 22 Count | 0 VDC | 0 VDC |
| 1782049903 | 17 Count | 39 Count | 16 Count | 0 VDC | 0 VDC |
| 1782049299 | 6 Count | 16 Count | 6 Count | 0 VDC | 0 VDC |
| 1782048695 | 338 Count | 1010 Count | 291 Count | 0 VDC | 0 VDC |
| 1782047488 | 322 Count | 973 Count | 277 Count | 0 VDC | 0 VDC |
| 1782045677 | 293 Count | 909 Count | 251 Count | 0 VDC | 0 VDC |
| 1782045073 | 284 Count | 892 Count | 243 Count | 0 VDC | 0 VDC |
| 1782044469 | 275 Count | 875 Count | 235 Count | 0 VDC | 0 VDC |
| 1782043866 | 267 Count | 851 Count | 228 Count | 0 VDC | 0 VDC |
| 1782042658 | 251 Count | 814 Count | 214 Count | 0 VDC | 0 VDC |
| 1782040846 | 224 Count | 742 Count | 190 Count | 0 VDC | 0 VDC |
| 1782040242 | 218 Count | 723 Count | 185 Count | 0 VDC | 0 VDC |
| 1782039638 | 209 Count | 702 Count | 177 Count | 0 VDC | 0 VDC |
| 1782038432 | 193 Count | 666 Count | 163 Count | 0 VDC | 0 VDC |
| 1782037828 | 186 Count | 641 Count | 157 Count | 0 VDC | 0 VDC |
| 1782037225 | 180 Count | 614 Count | 152 Count | 0 VDC | 0 VDC |
| 1782036620 | 171 Count | 590 Count | 144 Count | 0 VDC | 0 VDC |
| 1782036016 | 166 Count | 568 Count | 140 Count | 0 VDC | 0 VDC |
| 1782035413 | 160 Count | 547 Count | 135 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)