This is the latest recevied telemetry packets stored in our database for station/object SP5UID. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1788126409 | 1 Count | 457 Count | 0 Count | 0 VDC | 0 VDC |
| 1788122808 | 0 Count | 240 Count | 0 Count | 0 VDC | 0 VDC |
| 1788119208 | 5 Count | 1017 Count | 0 Count | 0 VDC | 0 VDC |
| 1788115607 | 4 Count | 824 Count | 0 Count | 0 VDC | 0 VDC |
| 1788112008 | 3 Count | 676 Count | 0 Count | 0 VDC | 0 VDC |
| 1788108407 | 2 Count | 478 Count | 0 Count | 0 VDC | 0 VDC |
| 1788104807 | 1 Count | 268 Count | 0 Count | 0 VDC | 0 VDC |
| 1788101206 | 0 Count | 196 Count | 0 Count | 0 VDC | 0 VDC |
| 1788097608 | 7 Count | 1162 Count | 0 Count | 0 VDC | 0 VDC |
| 1788094007 | 6 Count | 960 Count | 0 Count | 0 VDC | 0 VDC |
| 1788090407 | 5 Count | 743 Count | 0 Count | 0 VDC | 0 VDC |
| 1788086805 | 4 Count | 529 Count | 0 Count | 0 VDC | 0 VDC |
| 1788083208 | 3 Count | 221 Count | 0 Count | 0 VDC | 0 VDC |
| 1788079606 | 2 Count | 170 Count | 0 Count | 0 VDC | 0 VDC |
| 1788076006 | 1 Count | 113 Count | 0 Count | 0 VDC | 0 VDC |
| 1788072405 | 0 Count | 62 Count | 0 Count | 0 VDC | 0 VDC |
| 1788068807 | 11 Count | 1070 Count | 0 Count | 0 VDC | 0 VDC |
| 1788065206 | 10 Count | 975 Count | 0 Count | 0 VDC | 0 VDC |
| 1788061607 | 9 Count | 887 Count | 0 Count | 0 VDC | 0 VDC |
| 1788058005 | 8 Count | 803 Count | 0 Count | 0 VDC | 0 VDC |
| 1788054406 | 7 Count | 715 Count | 0 Count | 0 VDC | 0 VDC |
| 1788050805 | 6 Count | 617 Count | 0 Count | 0 VDC | 0 VDC |
| 1788047205 | 5 Count | 531 Count | 0 Count | 0 VDC | 0 VDC |
| 1788043604 | 4 Count | 423 Count | 0 Count | 0 VDC | 0 VDC |
| 1788040006 | 3 Count | 324 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)