This is the latest recevied telemetry packets stored in our database for station/object XE2OK-15. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1792548974 | 551 Count | 967 Count | 427 Count | 0 VDC | 0 VDC |
| 1792548071 | 547 Count | 959 Count | 424 Count | 0 VDC | 0 VDC |
| 1792547168 | 542 Count | 947 Count | 420 Count | 0 VDC | 0 VDC |
| 1792546265 | 539 Count | 942 Count | 418 Count | 0 VDC | 0 VDC |
| 1792545362 | 536 Count | 937 Count | 416 Count | 0 VDC | 0 VDC |
| 1792544459 | 520 Count | 918 Count | 401 Count | 0 VDC | 0 VDC |
| 1792543556 | 510 Count | 900 Count | 392 Count | 0 VDC | 0 VDC |
| 1792542652 | 504 Count | 889 Count | 387 Count | 0 VDC | 0 VDC |
| 1792541749 | 499 Count | 881 Count | 383 Count | 0 VDC | 0 VDC |
| 1792540846 | 493 Count | 874 Count | 378 Count | 0 VDC | 0 VDC |
| 1792539943 | 487 Count | 864 Count | 373 Count | 0 VDC | 0 VDC |
| 1792539037 | 481 Count | 856 Count | 368 Count | 0 VDC | 0 VDC |
| 1792538133 | 474 Count | 845 Count | 362 Count | 0 VDC | 0 VDC |
| 1792537230 | 468 Count | 836 Count | 357 Count | 0 VDC | 0 VDC |
| 1792536327 | 460 Count | 822 Count | 350 Count | 0 VDC | 0 VDC |
| 1792535424 | 455 Count | 812 Count | 346 Count | 0 VDC | 0 VDC |
| 1792534521 | 448 Count | 802 Count | 340 Count | 0 VDC | 0 VDC |
| 1792532715 | 431 Count | 778 Count | 325 Count | 0 VDC | 0 VDC |
| 1792531812 | 425 Count | 772 Count | 320 Count | 0 VDC | 0 VDC |
| 1792530909 | 419 Count | 763 Count | 315 Count | 0 VDC | 0 VDC |
| 1792530006 | 411 Count | 745 Count | 308 Count | 0 VDC | 0 VDC |
| 1792528270 | 389 Count | 721 Count | 292 Count | 0 VDC | 0 VDC |
| 1792527368 | 385 Count | 714 Count | 289 Count | 0 VDC | 0 VDC |
| 1792526464 | 377 Count | 703 Count | 282 Count | 0 VDC | 0 VDC |
| 1792525561 | 372 Count | 694 Count | 278 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)