This is the latest recevied telemetry packets stored in our database for station/object XE2OK-15. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1791044826 | 410 Count | 626 Count | 331 Count | 0 VDC | 0 VDC |
| 1791043923 | 383 Count | 597 Count | 305 Count | 0 VDC | 0 VDC |
| 1791043020 | 377 Count | 589 Count | 300 Count | 0 VDC | 0 VDC |
| 1791042117 | 373 Count | 583 Count | 297 Count | 0 VDC | 0 VDC |
| 1791041214 | 367 Count | 576 Count | 292 Count | 0 VDC | 0 VDC |
| 1791039408 | 332 Count | 540 Count | 259 Count | 0 VDC | 0 VDC |
| 1791038505 | 314 Count | 522 Count | 242 Count | 0 VDC | 0 VDC |
| 1791037609 | 309 Count | 522 Count | 242 Count | 0 VDC | 0 VDC |
| 1791027245 | 304 Count | 522 Count | 242 Count | 0 VDC | 0 VDC |
| 1791026342 | 298 Count | 515 Count | 237 Count | 0 VDC | 0 VDC |
| 1791025439 | 294 Count | 509 Count | 234 Count | 0 VDC | 0 VDC |
| 1791024536 | 288 Count | 502 Count | 229 Count | 0 VDC | 0 VDC |
| 1791023881 | 283 Count | 502 Count | 229 Count | 0 VDC | 0 VDC |
| 1791022978 | 279 Count | 495 Count | 226 Count | 0 VDC | 0 VDC |
| 1791022075 | 273 Count | 485 Count | 221 Count | 0 VDC | 0 VDC |
| 1791021172 | 269 Count | 478 Count | 218 Count | 0 VDC | 0 VDC |
| 1791020269 | 263 Count | 469 Count | 213 Count | 0 VDC | 0 VDC |
| 1791019366 | 259 Count | 463 Count | 210 Count | 0 VDC | 0 VDC |
| 1791018462 | 254 Count | 455 Count | 206 Count | 0 VDC | 0 VDC |
| 1791017559 | 250 Count | 450 Count | 203 Count | 0 VDC | 0 VDC |
| 1791016656 | 244 Count | 442 Count | 198 Count | 0 VDC | 0 VDC |
| 1791016529 | 239 Count | 442 Count | 198 Count | 0 VDC | 0 VDC |
| 1791015715 | 234 Count | 442 Count | 198 Count | 0 VDC | 0 VDC |
| 1791014812 | 228 Count | 433 Count | 193 Count | 0 VDC | 0 VDC |
| 1791013909 | 224 Count | 428 Count | 190 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)