This is the latest recevied telemetry packets stored in our database for station/object XE2OK-15. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1791536276 | 627 Count | 993 Count | 490 Count | 0 VDC | 0 VDC |
| 1791535373 | 623 Count | 985 Count | 487 Count | 0 VDC | 0 VDC |
| 1791534540 | 616 Count | 980 Count | 485 Count | 0 VDC | 0 VDC |
| 1791533637 | 610 Count | 969 Count | 480 Count | 0 VDC | 0 VDC |
| 1791532734 | 607 Count | 962 Count | 478 Count | 0 VDC | 0 VDC |
| 1791531831 | 602 Count | 955 Count | 474 Count | 0 VDC | 0 VDC |
| 1791530928 | 598 Count | 949 Count | 471 Count | 0 VDC | 0 VDC |
| 1791530025 | 592 Count | 939 Count | 466 Count | 0 VDC | 0 VDC |
| 1791529121 | 588 Count | 933 Count | 463 Count | 0 VDC | 0 VDC |
| 1791528218 | 582 Count | 925 Count | 458 Count | 0 VDC | 0 VDC |
| 1791527315 | 578 Count | 919 Count | 455 Count | 0 VDC | 0 VDC |
| 1791526413 | 574 Count | 911 Count | 452 Count | 0 VDC | 0 VDC |
| 1791525509 | 570 Count | 904 Count | 449 Count | 0 VDC | 0 VDC |
| 1791524606 | 564 Count | 892 Count | 444 Count | 0 VDC | 0 VDC |
| 1791523703 | 561 Count | 886 Count | 442 Count | 0 VDC | 0 VDC |
| 1791522800 | 555 Count | 875 Count | 437 Count | 0 VDC | 0 VDC |
| 1791521897 | 551 Count | 868 Count | 434 Count | 0 VDC | 0 VDC |
| 1791520994 | 545 Count | 857 Count | 429 Count | 0 VDC | 0 VDC |
| 1791520091 | 540 Count | 849 Count | 425 Count | 0 VDC | 0 VDC |
| 1791519188 | 534 Count | 840 Count | 420 Count | 0 VDC | 0 VDC |
| 1791518285 | 530 Count | 832 Count | 417 Count | 0 VDC | 0 VDC |
| 1791517382 | 523 Count | 822 Count | 411 Count | 0 VDC | 0 VDC |
| 1791516479 | 518 Count | 814 Count | 407 Count | 0 VDC | 0 VDC |
| 1791515575 | 509 Count | 802 Count | 399 Count | 0 VDC | 0 VDC |
| 1791514672 | 504 Count | 792 Count | 395 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)