This is the latest recevied telemetry packets stored in our database for station/object SQ9WRT-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1786972380 | 587 Count | 975 Count | 381 Count | 0 VDC | 0 VDC |
| 1786970578 | 565 Count | 939 Count | 362 Count | 0 VDC | 0 VDC |
| 1786965769 | 503 Count | 846 Count | 308 Count | 0 VDC | 0 VDC |
| 1786894386 | 167 Count | 381 Count | 107 Count | 0 VDC | 0 VDC |
| 1786889580 | 148 Count | 344 Count | 96 Count | 0 VDC | 0 VDC |
| 1786883568 | 124 Count | 288 Count | 82 Count | 0 VDC | 0 VDC |
| 1786882368 | 119 Count | 277 Count | 79 Count | 0 VDC | 0 VDC |
| 1786880565 | 112 Count | 262 Count | 75 Count | 0 VDC | 0 VDC |
| 1786877559 | 101 Count | 242 Count | 69 Count | 0 VDC | 0 VDC |
| 1786876956 | 98 Count | 236 Count | 67 Count | 0 VDC | 0 VDC |
| 1786875757 | 94 Count | 224 Count | 65 Count | 0 VDC | 0 VDC |
| 1786873988 | 82 Count | 202 Count | 60 Count | 0 VDC | 0 VDC |
| 1786873387 | 79 Count | 192 Count | 58 Count | 0 VDC | 0 VDC |
| 1786869181 | 42 Count | 122 Count | 28 Count | 0 VDC | 0 VDC |
| 1786863770 | 17 Count | 48 Count | 12 Count | 0 VDC | 0 VDC |
| 1786654136 | 20 Count | 74 Count | 8 Count | 0 VDC | 0 VDC |
| 1786637932 | 389 Count | 842 Count | 291 Count | 0 VDC | 0 VDC |
| 1786618136 | 155 Count | 319 Count | 125 Count | 0 VDC | 0 VDC |
| 1786617537 | 151 Count | 307 Count | 122 Count | 0 VDC | 0 VDC |
| 1786616935 | 147 Count | 298 Count | 120 Count | 0 VDC | 0 VDC |
| 1786547923 | 106 Count | 208 Count | 81 Count | 0 VDC | 0 VDC |
| 1786540745 | 61 Count | 115 Count | 52 Count | 0 VDC | 0 VDC |
| 1786452540 | 568 Count | 567 Count | 390 Count | 0 VDC | 0 VDC |
| 1786346381 | 919 Count | 914 Count | 550 Count | 0 VDC | 0 VDC |
| 1786345780 | 916 Count | 911 Count | 548 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)