This is the latest recevied telemetry packets stored in our database for station/object SQ9WRT-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1783644727 | 9 Count | 109 Count | 5 Count | 0 VDC | 0 VDC |
| 1783643826 | 7 Count | 89 Count | 4 Count | 0 VDC | 0 VDC |
| 1783642925 | 5 Count | 67 Count | 3 Count | 0 VDC | 0 VDC |
| 1783642026 | 3 Count | 40 Count | 2 Count | 0 VDC | 0 VDC |
| 1783641124 | 1 Count | 23 Count | 1 Count | 0 VDC | 0 VDC |
| 1783640223 | 151 Count | 1003 Count | 112 Count | 0 VDC | 0 VDC |
| 1783637523 | 145 Count | 937 Count | 109 Count | 0 VDC | 0 VDC |
| 1783634840 | 135 Count | 865 Count | 106 Count | 0 VDC | 0 VDC |
| 1783633938 | 133 Count | 843 Count | 105 Count | 0 VDC | 0 VDC |
| 1783631235 | 127 Count | 781 Count | 102 Count | 0 VDC | 0 VDC |
| 1783630336 | 125 Count | 751 Count | 101 Count | 0 VDC | 0 VDC |
| 1783629432 | 123 Count | 711 Count | 100 Count | 0 VDC | 0 VDC |
| 1783628532 | 121 Count | 682 Count | 99 Count | 0 VDC | 0 VDC |
| 1783626731 | 106 Count | 625 Count | 86 Count | 0 VDC | 0 VDC |
| 1783625829 | 87 Count | 575 Count | 68 Count | 0 VDC | 0 VDC |
| 1783624928 | 64 Count | 523 Count | 46 Count | 0 VDC | 0 VDC |
| 1783624027 | 46 Count | 467 Count | 29 Count | 0 VDC | 0 VDC |
| 1783622225 | 36 Count | 388 Count | 21 Count | 0 VDC | 0 VDC |
| 1783621324 | 34 Count | 354 Count | 20 Count | 0 VDC | 0 VDC |
| 1783620423 | 32 Count | 327 Count | 19 Count | 0 VDC | 0 VDC |
| 1783619522 | 30 Count | 299 Count | 18 Count | 0 VDC | 0 VDC |
| 1783616820 | 24 Count | 227 Count | 15 Count | 0 VDC | 0 VDC |
| 1783615918 | 22 Count | 203 Count | 14 Count | 0 VDC | 0 VDC |
| 1783614141 | 14 Count | 127 Count | 12 Count | 0 VDC | 0 VDC |
| 1783613239 | 12 Count | 75 Count | 11 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)