This is the latest recevied telemetry packets stored in our database for station/object SV3SMG-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1782058708 | 432 Count | 160 Count | 160 Count | 4.07 VDC | 0 VDC |
| 1782056904 | 423 Count | 153 Count | 153 Count | 4.09 VDC | 0 VDC |
| 1782055100 | 406 Count | 138 Count | 138 Count | 4.08 VDC | 0 VDC |
| 1782053297 | 399 Count | 135 Count | 135 Count | 4.09 VDC | 0 VDC |
| 1782051493 | 393 Count | 133 Count | 133 Count | 4.07 VDC | 0 VDC |
| 1782049689 | 385 Count | 127 Count | 127 Count | 4.07 VDC | 0 VDC |
| 1782047885 | 377 Count | 121 Count | 121 Count | 4.08 VDC | 0 VDC |
| 1782046082 | 368 Count | 114 Count | 114 Count | 4.08 VDC | 0 VDC |
| 1782044278 | 366 Count | 114 Count | 114 Count | 4.08 VDC | 0 VDC |
| 1782042474 | 364 Count | 114 Count | 114 Count | 4.07 VDC | 0 VDC |
| 1782040715 | 361 Count | 114 Count | 114 Count | 4.09 VDC | 0 VDC |
| 1782038911 | 358 Count | 114 Count | 114 Count | 4.07 VDC | 0 VDC |
| 1782037106 | 356 Count | 114 Count | 114 Count | 4.09 VDC | 0 VDC |
| 1782035303 | 354 Count | 114 Count | 114 Count | 4.08 VDC | 0 VDC |
| 1782033499 | 352 Count | 114 Count | 114 Count | 4.08 VDC | 0 VDC |
| 1782031695 | 350 Count | 114 Count | 114 Count | 4.08 VDC | 0 VDC |
| 1782029892 | 347 Count | 114 Count | 114 Count | 4.07 VDC | 0 VDC |
| 1782028088 | 345 Count | 114 Count | 114 Count | 4.07 VDC | 0 VDC |
| 1782026284 | 341 Count | 114 Count | 114 Count | 4.08 VDC | 0 VDC |
| 1782024480 | 339 Count | 114 Count | 114 Count | 4.09 VDC | 0 VDC |
| 1782022677 | 337 Count | 114 Count | 114 Count | 4.08 VDC | 0 VDC |
| 1782020873 | 335 Count | 114 Count | 114 Count | 4.08 VDC | 0 VDC |
| 1782019115 | 331 Count | 114 Count | 114 Count | 4.09 VDC | 0 VDC |
| 1782017311 | 327 Count | 114 Count | 114 Count | 4.08 VDC | 0 VDC |
| 1782015507 | 323 Count | 114 Count | 114 Count | 4.07 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)