This is the latest recevied telemetry packets stored in our database for station/object M9PHD-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1782066912 | 540 Count | 544 Count | 341 Count | 0 VDC | 0 VDC |
| 1782066311 | 537 Count | 541 Count | 339 Count | 0 VDC | 0 VDC |
| 1782065710 | 535 Count | 539 Count | 338 Count | 0 VDC | 0 VDC |
| 1782065110 | 532 Count | 536 Count | 336 Count | 0 VDC | 0 VDC |
| 1782064509 | 529 Count | 533 Count | 334 Count | 0 VDC | 0 VDC |
| 1782063908 | 527 Count | 531 Count | 333 Count | 0 VDC | 0 VDC |
| 1782063308 | 524 Count | 528 Count | 331 Count | 0 VDC | 0 VDC |
| 1782062707 | 521 Count | 525 Count | 329 Count | 0 VDC | 0 VDC |
| 1782062105 | 519 Count | 523 Count | 328 Count | 0 VDC | 0 VDC |
| 1782061505 | 516 Count | 520 Count | 326 Count | 0 VDC | 0 VDC |
| 1782060904 | 513 Count | 517 Count | 324 Count | 0 VDC | 0 VDC |
| 1782060303 | 511 Count | 515 Count | 323 Count | 0 VDC | 0 VDC |
| 1782059703 | 508 Count | 512 Count | 321 Count | 0 VDC | 0 VDC |
| 1782059102 | 505 Count | 509 Count | 319 Count | 0 VDC | 0 VDC |
| 1782058501 | 503 Count | 507 Count | 318 Count | 0 VDC | 0 VDC |
| 1782057902 | 500 Count | 504 Count | 316 Count | 0 VDC | 0 VDC |
| 1782057300 | 497 Count | 501 Count | 314 Count | 0 VDC | 0 VDC |
| 1782056699 | 495 Count | 499 Count | 313 Count | 0 VDC | 0 VDC |
| 1782056098 | 488 Count | 492 Count | 307 Count | 0 VDC | 0 VDC |
| 1782055498 | 485 Count | 489 Count | 305 Count | 0 VDC | 0 VDC |
| 1782054897 | 483 Count | 487 Count | 304 Count | 0 VDC | 0 VDC |
| 1782054297 | 480 Count | 484 Count | 302 Count | 0 VDC | 0 VDC |
| 1782053696 | 477 Count | 481 Count | 300 Count | 0 VDC | 0 VDC |
| 1782053095 | 475 Count | 479 Count | 299 Count | 0 VDC | 0 VDC |
| 1782052494 | 472 Count | 476 Count | 297 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)