This is the latest recevied telemetry packets stored in our database for station/object M9PHD-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1781366681 | 503 Count | 380 Count | 284 Count | 0 VDC | 0 VDC |
| 1781366080 | 500 Count | 377 Count | 282 Count | 0 VDC | 0 VDC |
| 1781365506 | 498 Count | 375 Count | 281 Count | 0 VDC | 0 VDC |
| 1781364905 | 495 Count | 372 Count | 279 Count | 0 VDC | 0 VDC |
| 1781364304 | 492 Count | 369 Count | 277 Count | 0 VDC | 0 VDC |
| 1781363704 | 490 Count | 367 Count | 276 Count | 0 VDC | 0 VDC |
| 1781363103 | 488 Count | 364 Count | 275 Count | 0 VDC | 0 VDC |
| 1781362502 | 485 Count | 361 Count | 273 Count | 0 VDC | 0 VDC |
| 1781361901 | 483 Count | 359 Count | 272 Count | 0 VDC | 0 VDC |
| 1781361301 | 477 Count | 354 Count | 267 Count | 0 VDC | 0 VDC |
| 1781360700 | 475 Count | 353 Count | 266 Count | 0 VDC | 0 VDC |
| 1781360100 | 474 Count | 353 Count | 266 Count | 0 VDC | 0 VDC |
| 1781359499 | 471 Count | 351 Count | 264 Count | 0 VDC | 0 VDC |
| 1781358898 | 470 Count | 351 Count | 264 Count | 0 VDC | 0 VDC |
| 1781358296 | 468 Count | 350 Count | 263 Count | 0 VDC | 0 VDC |
| 1781357696 | 465 Count | 347 Count | 261 Count | 0 VDC | 0 VDC |
| 1781357095 | 463 Count | 345 Count | 260 Count | 0 VDC | 0 VDC |
| 1781356494 | 460 Count | 342 Count | 258 Count | 0 VDC | 0 VDC |
| 1781355894 | 458 Count | 339 Count | 257 Count | 0 VDC | 0 VDC |
| 1781355293 | 456 Count | 337 Count | 256 Count | 0 VDC | 0 VDC |
| 1781354692 | 453 Count | 334 Count | 254 Count | 0 VDC | 0 VDC |
| 1781354092 | 450 Count | 331 Count | 252 Count | 0 VDC | 0 VDC |
| 1781353491 | 448 Count | 329 Count | 251 Count | 0 VDC | 0 VDC |
| 1781352890 | 445 Count | 326 Count | 249 Count | 0 VDC | 0 VDC |
| 1781352290 | 442 Count | 323 Count | 247 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)