This is the latest recevied telemetry packets stored in our database for station/object SQ7HIL-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1792561896 | 923 Count | 727 Count | 0 Count | 0 VDC | 0 VDC |
| 1792561593 | 922 Count | 727 Count | 0 Count | 0 VDC | 0 VDC |
| 1792560683 | 919 Count | 727 Count | 0 Count | 0 VDC | 0 VDC |
| 1792557954 | 910 Count | 727 Count | 0 Count | 0 VDC | 0 VDC |
| 1792557348 | 908 Count | 727 Count | 0 Count | 0 VDC | 0 VDC |
| 1792556741 | 906 Count | 727 Count | 0 Count | 0 VDC | 0 VDC |
| 1792556438 | 905 Count | 727 Count | 0 Count | 0 VDC | 0 VDC |
| 1792556135 | 904 Count | 727 Count | 0 Count | 0 VDC | 0 VDC |
| 1792554922 | 900 Count | 727 Count | 0 Count | 0 VDC | 0 VDC |
| 1792554315 | 898 Count | 727 Count | 0 Count | 0 VDC | 0 VDC |
| 1792553709 | 896 Count | 727 Count | 0 Count | 0 VDC | 0 VDC |
| 1792553406 | 895 Count | 727 Count | 0 Count | 0 VDC | 0 VDC |
| 1792552496 | 892 Count | 727 Count | 0 Count | 0 VDC | 0 VDC |
| 1792552193 | 891 Count | 727 Count | 0 Count | 0 VDC | 0 VDC |
| 1792551283 | 888 Count | 727 Count | 0 Count | 0 VDC | 0 VDC |
| 1792550980 | 887 Count | 727 Count | 0 Count | 0 VDC | 0 VDC |
| 1792550374 | 885 Count | 727 Count | 0 Count | 0 VDC | 0 VDC |
| 1792549767 | 883 Count | 727 Count | 0 Count | 0 VDC | 0 VDC |
| 1792549158 | 881 Count | 727 Count | 0 Count | 0 VDC | 0 VDC |
| 1792548855 | 880 Count | 727 Count | 0 Count | 0 VDC | 0 VDC |
| 1792548551 | 879 Count | 727 Count | 0 Count | 0 VDC | 0 VDC |
| 1792548248 | 878 Count | 727 Count | 0 Count | 0 VDC | 0 VDC |
| 1792547945 | 877 Count | 727 Count | 0 Count | 0 VDC | 0 VDC |
| 1792547642 | 876 Count | 727 Count | 0 Count | 0 VDC | 0 VDC |
| 1792547339 | 875 Count | 727 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)