This is the latest recevied telemetry packets stored in our database for station/object SR2BC-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1782106259 | 188 Count | 960 Count | 145 Count | 0 VDC | 0 VDC |
| 1782100857 | 180 Count | 928 Count | 140 Count | 0 VDC | 0 VDC |
| 1782099056 | 178 Count | 918 Count | 139 Count | 0 VDC | 0 VDC |
| 1782097255 | 176 Count | 907 Count | 138 Count | 0 VDC | 0 VDC |
| 1782095454 | 174 Count | 898 Count | 137 Count | 0 VDC | 0 VDC |
| 1782093653 | 172 Count | 888 Count | 136 Count | 0 VDC | 0 VDC |
| 1782091852 | 169 Count | 880 Count | 134 Count | 0 VDC | 0 VDC |
| 1782090051 | 167 Count | 873 Count | 133 Count | 0 VDC | 0 VDC |
| 1782088250 | 165 Count | 865 Count | 132 Count | 0 VDC | 0 VDC |
| 1782086449 | 163 Count | 859 Count | 131 Count | 0 VDC | 0 VDC |
| 1781976006 | 90 Count | 378 Count | 59 Count | 0 VDC | 0 VDC |
| 1781974205 | 87 Count | 368 Count | 57 Count | 0 VDC | 0 VDC |
| 1781970603 | 83 Count | 358 Count | 55 Count | 0 VDC | 0 VDC |
| 1781968802 | 81 Count | 352 Count | 54 Count | 0 VDC | 0 VDC |
| 1781967001 | 79 Count | 346 Count | 53 Count | 0 VDC | 0 VDC |
| 1781965200 | 76 Count | 335 Count | 51 Count | 0 VDC | 0 VDC |
| 1781963399 | 74 Count | 328 Count | 50 Count | 0 VDC | 0 VDC |
| 1781961599 | 72 Count | 324 Count | 49 Count | 0 VDC | 0 VDC |
| 1781959797 | 70 Count | 320 Count | 48 Count | 0 VDC | 0 VDC |
| 1781957997 | 63 Count | 309 Count | 42 Count | 0 VDC | 0 VDC |
| 1781956196 | 61 Count | 302 Count | 41 Count | 0 VDC | 0 VDC |
| 1781955059 | 60 Count | 297 Count | 41 Count | 0 VDC | 0 VDC |
| 1781953258 | 57 Count | 287 Count | 39 Count | 0 VDC | 0 VDC |
| 1781951457 | 55 Count | 279 Count | 38 Count | 0 VDC | 0 VDC |
| 1781949656 | 53 Count | 272 Count | 37 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)