This is the latest recevied telemetry packets stored in our database for station/object EB5BZM-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1789354468 | 7 Count | 662 Count | 0 Count | 0 VDC | 0 VDC |
| 1789352423 | 6 Count | 585 Count | 0 Count | 0 VDC | 0 VDC |
| 1789350378 | 5 Count | 489 Count | 0 Count | 0 VDC | 0 VDC |
| 1789348333 | 4 Count | 404 Count | 0 Count | 0 VDC | 0 VDC |
| 1789347185 | 3 Count | 358 Count | 0 Count | 0 VDC | 0 VDC |
| 1789345139 | 2 Count | 290 Count | 0 Count | 0 VDC | 0 VDC |
| 1789343095 | 1 Count | 203 Count | 0 Count | 0 VDC | 0 VDC |
| 1789341049 | 0 Count | 107 Count | 0 Count | 0 VDC | 0 VDC |
| 1789339003 | 9 Count | 1103 Count | 0 Count | 0 VDC | 0 VDC |
| 1789336958 | 8 Count | 997 Count | 0 Count | 0 VDC | 0 VDC |
| 1789334914 | 7 Count | 864 Count | 0 Count | 0 VDC | 0 VDC |
| 1789332869 | 6 Count | 725 Count | 0 Count | 0 VDC | 0 VDC |
| 1789330824 | 5 Count | 598 Count | 0 Count | 0 VDC | 0 VDC |
| 1789328779 | 4 Count | 505 Count | 0 Count | 0 VDC | 0 VDC |
| 1789326734 | 3 Count | 404 Count | 0 Count | 0 VDC | 0 VDC |
| 1789325583 | 2 Count | 344 Count | 0 Count | 0 VDC | 0 VDC |
| 1789323538 | 1 Count | 228 Count | 0 Count | 0 VDC | 0 VDC |
| 1789321493 | 0 Count | 111 Count | 0 Count | 0 VDC | 0 VDC |
| 1789319448 | 9 Count | 1052 Count | 0 Count | 0 VDC | 0 VDC |
| 1789317403 | 8 Count | 934 Count | 0 Count | 0 VDC | 0 VDC |
| 1789315358 | 7 Count | 829 Count | 0 Count | 0 VDC | 0 VDC |
| 1789313313 | 6 Count | 709 Count | 0 Count | 0 VDC | 0 VDC |
| 1789311268 | 5 Count | 585 Count | 0 Count | 0 VDC | 0 VDC |
| 1789309223 | 4 Count | 463 Count | 0 Count | 0 VDC | 0 VDC |
| 1789307178 | 3 Count | 361 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)