This is the latest recevied telemetry packets stored in our database for station/object F6JON-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1775258870 | 56 Count | 65 Count | 49 Count | 0 VDC | 0 VDC |
| 1775258267 | 51 Count | 58 Count | 45 Count | 0 VDC | 0 VDC |
| 1775257664 | 42 Count | 49 Count | 37 Count | 0 VDC | 0 VDC |
| 1775257061 | 35 Count | 41 Count | 31 Count | 0 VDC | 0 VDC |
| 1775256457 | 28 Count | 34 Count | 25 Count | 0 VDC | 0 VDC |
| 1775255854 | 20 Count | 25 Count | 18 Count | 0 VDC | 0 VDC |
| 1775255251 | 13 Count | 16 Count | 12 Count | 0 VDC | 0 VDC |
| 1775254648 | 8 Count | 10 Count | 8 Count | 0 VDC | 0 VDC |
| 1775254042 | 713 Count | 1004 Count | 511 Count | 0 VDC | 0 VDC |
| 1775253439 | 706 Count | 996 Count | 505 Count | 0 VDC | 0 VDC |
| 1775252836 | 698 Count | 989 Count | 498 Count | 0 VDC | 0 VDC |
| 1775252233 | 692 Count | 981 Count | 493 Count | 0 VDC | 0 VDC |
| 1775251630 | 686 Count | 973 Count | 488 Count | 0 VDC | 0 VDC |
| 1775251019 | 679 Count | 966 Count | 482 Count | 0 VDC | 0 VDC |
| 1775250416 | 673 Count | 959 Count | 477 Count | 0 VDC | 0 VDC |
| 1775249813 | 668 Count | 951 Count | 473 Count | 0 VDC | 0 VDC |
| 1775249204 | 661 Count | 943 Count | 467 Count | 0 VDC | 0 VDC |
| 1775248600 | 656 Count | 937 Count | 463 Count | 0 VDC | 0 VDC |
| 1775248123 | 652 Count | 932 Count | 460 Count | 0 VDC | 0 VDC |
| 1775247520 | 646 Count | 924 Count | 455 Count | 0 VDC | 0 VDC |
| 1775246917 | 639 Count | 916 Count | 449 Count | 0 VDC | 0 VDC |
| 1775246314 | 633 Count | 909 Count | 444 Count | 0 VDC | 0 VDC |
| 1775245711 | 626 Count | 898 Count | 438 Count | 0 VDC | 0 VDC |
| 1775245108 | 619 Count | 890 Count | 432 Count | 0 VDC | 0 VDC |
| 1775244504 | 612 Count | 881 Count | 426 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)