This is the latest recevied telemetry packets stored in our database for station/object SQ3KT-15. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1788105420 | 184 Count | 269 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1788104219 | 183 Count | 268 Count | 0 Count | 4.3 VDC | 0 VDC |
| 1788103018 | 182 Count | 267 Count | 0 Count | 4.32 VDC | 0 VDC |
| 1788101818 | 181 Count | 266 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1788100617 | 180 Count | 265 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1788099416 | 179 Count | 262 Count | 0 Count | 4.33 VDC | 0 VDC |
| 1788098215 | 178 Count | 251 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1788097015 | 177 Count | 250 Count | 0 Count | 4.33 VDC | 0 VDC |
| 1788095814 | 176 Count | 249 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1788094613 | 175 Count | 248 Count | 0 Count | 4.31 VDC | 0 VDC |
| 1788093412 | 174 Count | 247 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1788092211 | 173 Count | 246 Count | 0 Count | 4.33 VDC | 0 VDC |
| 1788091011 | 172 Count | 245 Count | 0 Count | 4.33 VDC | 0 VDC |
| 1788089810 | 171 Count | 244 Count | 0 Count | 4.29 VDC | 0 VDC |
| 1788088609 | 170 Count | 243 Count | 0 Count | 4.34 VDC | 0 VDC |
| 1788087408 | 169 Count | 239 Count | 0 Count | 4.33 VDC | 0 VDC |
| 1788086208 | 168 Count | 238 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1788085007 | 167 Count | 237 Count | 0 Count | 4.31 VDC | 0 VDC |
| 1788083819 | 166 Count | 236 Count | 0 Count | 4.32 VDC | 0 VDC |
| 1788082618 | 165 Count | 235 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1788081418 | 164 Count | 234 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1788080217 | 163 Count | 233 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1788079016 | 162 Count | 232 Count | 0 Count | 4.32 VDC | 0 VDC |
| 1788077816 | 161 Count | 231 Count | 0 Count | 4.3 VDC | 0 VDC |
| 1788076615 | 160 Count | 225 Count | 0 Count | 4.32 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)