This is the latest recevied telemetry packets stored in our database for station/object SQ3KT-15. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1791013631 | 352 Count | 454 Count | 0 Count | 4.32 VDC | 0 VDC |
| 1791013501 | 351 Count | 454 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1791012300 | 350 Count | 453 Count | 0 Count | 4.34 VDC | 0 VDC |
| 1791011100 | 349 Count | 452 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1791009899 | 348 Count | 451 Count | 0 Count | 4.33 VDC | 0 VDC |
| 1791008698 | 347 Count | 450 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1791007511 | 346 Count | 449 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1791006310 | 345 Count | 448 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1791005109 | 344 Count | 447 Count | 0 Count | 4.3 VDC | 0 VDC |
| 1791003909 | 343 Count | 446 Count | 0 Count | 4.31 VDC | 0 VDC |
| 1791002708 | 342 Count | 445 Count | 0 Count | 4.33 VDC | 0 VDC |
| 1791001507 | 341 Count | 444 Count | 0 Count | 4.3 VDC | 0 VDC |
| 1791000306 | 340 Count | 443 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1790999106 | 339 Count | 442 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1790997905 | 338 Count | 441 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1790996704 | 337 Count | 440 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1790995503 | 336 Count | 439 Count | 0 Count | 4.3 VDC | 0 VDC |
| 1790994303 | 335 Count | 438 Count | 0 Count | 4.32 VDC | 0 VDC |
| 1790993102 | 334 Count | 437 Count | 0 Count | 4.29 VDC | 0 VDC |
| 1790991901 | 333 Count | 431 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1790990700 | 332 Count | 430 Count | 0 Count | 4.33 VDC | 0 VDC |
| 1790989500 | 331 Count | 429 Count | 0 Count | 4.33 VDC | 0 VDC |
| 1790988299 | 330 Count | 428 Count | 0 Count | 4.32 VDC | 0 VDC |
| 1790987098 | 329 Count | 427 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1790985910 | 328 Count | 426 Count | 0 Count | 4.29 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)