This is the latest recevied telemetry packets stored in our database for station/object SQ3KT-15. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1779674775 | 19 Count | 209 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1779671773 | 17 Count | 203 Count | 0 Count | 4.3 VDC | 0 VDC |
| 1779670273 | 16 Count | 200 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1779668776 | 15 Count | 197 Count | 0 Count | 4.3 VDC | 0 VDC |
| 1779667279 | 14 Count | 194 Count | 0 Count | 4.24 VDC | 0 VDC |
| 1779666679 | 9 Count | 193 Count | 0 Count | 4.31 VDC | 0 VDC |
| 1779663678 | 7 Count | 187 Count | 0 Count | 4.31 VDC | 0 VDC |
| 1779662177 | 6 Count | 183 Count | 0 Count | 4.36 VDC | 0 VDC |
| 1779659177 | 4 Count | 171 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1779657676 | 3 Count | 161 Count | 0 Count | 4.29 VDC | 0 VDC |
| 1779654671 | 1 Count | 73 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1779653170 | 0 Count | 30 Count | 0 Count | 4.32 VDC | 0 VDC |
| 1779651677 | 96 Count | 1035 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1779650169 | 95 Count | 992 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1779648668 | 94 Count | 950 Count | 0 Count | 4.35 VDC | 0 VDC |
| 1779647167 | 93 Count | 930 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1779645667 | 92 Count | 895 Count | 0 Count | 4.34 VDC | 0 VDC |
| 1779645075 | 87 Count | 890 Count | 0 Count | 4.24 VDC | 0 VDC |
| 1779643574 | 86 Count | 889 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1779642073 | 85 Count | 859 Count | 0 Count | 4.23 VDC | 0 VDC |
| 1779640573 | 84 Count | 820 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1779639072 | 83 Count | 801 Count | 0 Count | 4.31 VDC | 0 VDC |
| 1779637572 | 82 Count | 780 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1779636071 | 81 Count | 757 Count | 0 Count | 4.36 VDC | 0 VDC |
| 1779634570 | 80 Count | 730 Count | 0 Count | 4.24 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)